- Location
- Littlehampton, West Sussex
- Main postcode district
- BN17
- Nearby (straight line)
- Bognor Regis (6 miles), Worthing (7 miles) and Lancing (10 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
How does this suit sites in Littlehampton?
Food producers in Littlehampton with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock. Whether your site in Littlehampton is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
Busy cross-dock and parcel operations in Littlehampton can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open.
Any project involving high-speed dock doors at a working site in Littlehampton takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
What does a high-speed dock door cost, and why does the price vary so much?
A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.
The main things that move the price are:
- Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
- Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
- Self-repair and breakaway features: worth paying for wherever forklifts pass through.
- Activation: radar, induction loops or pull cords, and how many control points are needed.
- Interlocks: links to an outer door, a leveller or traffic lights.
- Site works: power supply, removing an old door or strip curtain, and access equipment.
Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Wind exposure at the dock, which affects door and shelter choice
- Access for deliveries, cranes or lifting equipment during installation
- How often each door cycles during a typical shift
- Bumper position and wear or damage on the dock face
- How drivers are prevented from pulling away too early
- Headroom above the opening and which track type will suit it
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Wind-reinforced external build
Wind bars, tensioned belts and deeper guides keep the curtain in place at exposed external openings, so the door stays reliable when the yard is windy.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Littlehampton, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Littlehampton
Is the site survey in Littlehampton free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Will you deal with building control and planning for a project in Littlehampton?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Can you work alongside our main contractor on a new build in Littlehampton?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
Do high-speed doors help with temperature control?
Yes, by cutting the time the opening is left open, a high-speed door reduces the warm or chilled air that escapes. It closes behind each forklift instead of standing open between movements. An insulated curtain adds some thermal resistance, but the main gain comes from shorter open times rather than the curtain itself.
High-speed dock doors near Littlehampton
The same survey, quote and repair service is available in towns around Littlehampton, such as Bognor Regis (6 miles), Worthing (7 miles) and Lancing (10 miles).
Other loading bay services in Littlehampton
Full guide to high-speed dock doors · Everything we do in Littlehampton
For a written price on loading bay work in Littlehampton, request a quote and include photos of the bay if you can.