- Location
- Felling, Tyne and Wear
- Main postcode district
- NE10
- Nearby (straight line)
- Gateshead (1 mile), Newcastle upon Tyne (2 miles) and Hebburn (3 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
Why do sites in Felling choose this?
Manufacturers around Felling moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments. Busy cross-dock and parcel operations in Felling can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open.
Yards that are open to the weather in Felling may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening.
If you are planning high-speed dock doors for a site in Felling, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
What does a high-speed dock door cost, and why does the price vary so much?
A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.
The main things that move the price are:
- Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
- Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
- Self-repair and breakaway features: worth paying for wherever forklifts pass through.
- Activation: radar, induction loops or pull cords, and how many control points are needed.
- Interlocks: links to an outer door, a leveller or traffic lights.
- Site works: power supply, removing an old door or strip curtain, and access equipment.
Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.
What keeps a high-speed door reliable at a busy dock?
Servicing matched to the number of cycles is what keeps a high-speed door reliable, because these doors can open and close far more often in a shift than a conventional door.
- Duty cycle: check the drive is rated for the openings per hour your site actually runs, including peaks.
- Safety devices: the light curtain, photocells and bottom edge should be tested at every service.
- Curtain and guides: worn guide brushes, a stretched curtain or a damaged bottom bar cause misalignment and stoppages.
- Activation: poorly set radar can open the door for passing traffic, adding needless cycles and wear.
- Impact: repeated knocks shorten curtain life even when the door self-repairs, so look at traffic routes and driver habits.
Planned maintenance visits are chargeable and agreed in advance. Keeping a log of faults and knocks helps the engineer spot patterns before they stop the door.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Escape routes and pedestrian doors close to the bay
- Temperature requirements for chilled, frozen or ambient goods
- Dock height and the mix of trailers you load
- Age and condition of the equipment already in place
- Headroom above the opening and which track type will suit it
- How drivers are prevented from pulling away too early
Options to discuss
Self-repairing curtain
If a forklift strikes the door, the curtain or bottom bar pulls out of the side guides without damage and re-engages on the next cycle, keeping the opening in use.
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Which rules apply in England?
Sites in Felling fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about high-speed dock doors in Felling
Can you work alongside our main contractor on a new build in Felling?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Which building and safety rules apply to a site in Felling?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Felling, we check what applies at survey and design to it.
Can you work outside our normal operating hours in Felling?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
Is a high-speed door secure enough to be the only door at a dock?
Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.
High-speed dock doors near Felling
Businesses outside Felling may find their nearest town in this list: Gateshead (1 mile), Newcastle upon Tyne (2 miles) and Hebburn (3 miles). Each page covers doors, docks, repairs and servicing.
Other loading bay services in Felling
Full guide to high-speed dock doors · Everything we do in Felling
For a written price on loading bay work in Felling, request a quote and include photos of the bay if you can.