- Location
- Woking, Surrey
- Main postcode district
- GU22
- Nearby (straight line)
- Weybridge (6 miles), Guildford (6 miles) and Egham (8 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What matters for high-speed dock doors in Woking?
Replacing tired strip curtains is one reason a business in Woking might consider a high-speed door, especially where drivers struggle to see through scratched strips. Whether your site in Woking is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
Manufacturers around Woking moving work in progress between production and dispatch can use high-speed doors to stop dust and draughts crossing departments.
Our part of the job in Woking is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.
What keeps a high-speed door reliable at a busy dock?
Servicing matched to the number of cycles is what keeps a high-speed door reliable, because these doors can open and close far more often in a shift than a conventional door.
- Duty cycle: check the drive is rated for the openings per hour your site actually runs, including peaks.
- Safety devices: the light curtain, photocells and bottom edge should be tested at every service.
- Curtain and guides: worn guide brushes, a stretched curtain or a damaged bottom bar cause misalignment and stoppages.
- Activation: poorly set radar can open the door for passing traffic, adding needless cycles and wear.
- Impact: repeated knocks shorten curtain life even when the door self-repairs, so look at traffic routes and driver habits.
Planned maintenance visits are chargeable and agreed in advance. Keeping a log of faults and knocks helps the engineer spot patterns before they stop the door.
Can a high-speed door be used on an external dock opening?
Yes, provided it is specified for the wind and weather the opening faces. Many high-speed doors are designed for internal openings, so an external dock door needs a reinforced build.
- Wind resistance: external doors use stronger curtains, horizontal wind bars or tensioned belts, and deeper side guides so the curtain stays put in gusts.
- Insulation: a double-skin curtain reduces heat loss, though fabric does not insulate as well as a thick sectional door.
- Security: fabric doors are not security doors, so many sites keep a sectional door or shutter outside for closing at night.
- Impact protection: a self-repairing curtain re-engages after a knock, which matters at a busy dock.
For openings that are mainly internal, such as between goods-in and a chilled zone, a lighter single-skin door with vision panels is usually enough. We match the build to the exposure at survey.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Headroom above the opening and which track type will suit it
- Control positions, isolators and any existing interlocks
- Forklift and pallet truck loads crossing the leveller platform
- How often each door cycles during a typical shift
- Escape routes and pedestrian doors close to the bay
- Wheel guide positions and yard markings for reversing vehicles
Options to discuss
Wind-reinforced external build
Wind bars, tensioned belts and deeper guides keep the curtain in place at exposed external openings, so the door stays reliable when the yard is windy.
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
What do the rules in England mean for the work?
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Woking, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about high-speed dock doors in Woking
Which building and safety rules apply to a site in Woking?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Woking, we check what applies at survey and design to it.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Woking, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
What details do you need from us to quote for high-speed dock doors?
To get started, send the site address in Woking, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can a high-speed door be opened in a power cut?
Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
High-speed dock doors near Woking
Close neighbours of Woking with their own pages here: Weybridge (6 miles), Guildford (6 miles) and Egham (8 miles). Choose one to see coverage details for that town.
Other loading bay services in Woking
Full guide to high-speed dock doors · Everything we do in Woking
Call us or request a quote online to talk through loading bay work at your site in Woking.