Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Egham

High-speed dock doors in Egham

Talk to us about high-speed dock doors in Egham. We cover Surrey and can advise on the right approach for your doors, levellers, shelters and dock safety equipment.

Guide £6,500–£14,500 per door ex VATFree site surveyTW20
Location
Egham, Surrey
Main postcode district
TW20
Nearby (straight line)
Staines (2 miles), Ashford (4 miles) and Windsor (4 miles)
Survey and quote
Free, with a fixed written quote
High-speed dock doors, in short

A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.

Is this right for your site in Egham?

Whether your site in Egham is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door. Yards that are open to the weather in Egham may need a wind-reinforced build, because a standard internal high-speed door is not designed for gusts at an external opening.

A warehouse in Egham running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit.

Your loading bay stays our responsibility from the survey to the handover. In Egham, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.

Can a high-speed door be used on an external dock opening?

Yes, provided it is specified for the wind and weather the opening faces. Many high-speed doors are designed for internal openings, so an external dock door needs a reinforced build.

  • Wind resistance: external doors use stronger curtains, horizontal wind bars or tensioned belts, and deeper side guides so the curtain stays put in gusts.
  • Insulation: a double-skin curtain reduces heat loss, though fabric does not insulate as well as a thick sectional door.
  • Security: fabric doors are not security doors, so many sites keep a sectional door or shutter outside for closing at night.
  • Impact protection: a self-repairing curtain re-engages after a knock, which matters at a busy dock.

For openings that are mainly internal, such as between goods-in and a chilled zone, a lighter single-skin door with vision panels is usually enough. We match the build to the exposure at survey.

What does a high-speed dock door cost, and why does the price vary so much?

A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.

The main things that move the price are:

  • Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
  • Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
  • Self-repair and breakaway features: worth paying for wherever forklifts pass through.
  • Activation: radar, induction loops or pull cords, and how many control points are needed.
  • Interlocks: links to an outer door, a leveller or traffic lights.
  • Site works: power supply, removing an old door or strip curtain, and access equipment.

Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.

Guide price, Egham
£6,500–£14,500 per door, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

  • How drivers are prevented from pulling away too early
  • Clear opening width and height for each door
  • Access for deliveries, cranes or lifting equipment during installation
  • Headroom above the opening and which track type will suit it
  • Power supply at each bay, including three-phase availability
  • Forklift and pallet truck loads crossing the leveller platform

Options to discuss

Insulated double-skin curtain

Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.

Radar, loop and pull-cord activation

Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.

What do the rules in England mean for the work?

Workplace safety in England is regulated by HSE. For a loading bay in Egham, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about high-speed dock doors in Egham

How long does installation take at a site in Egham?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

Do you cover Egham for high-speed dock doors?

Yes. We take on high-speed dock doors for businesses in Egham and across Surrey. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Egham, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Is a high-speed door secure enough to be the only door at a dock?

Usually not on an external dock. Fabric curtains are designed for speed and draught control rather than security, so most sites keep an insulated sectional door or shutter on the outside for closing at night. Some rigid high-speed designs give more security, and we can discuss them where a single door is needed.

Can a high-speed door be opened in a power cut?

Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.

High-speed dock doors near Egham

Other towns within reach of Egham on our coverage list include Staines (2 miles), Ashford (4 miles) and Windsor (4 miles), all covered on the same terms.

Other loading bay services in Egham

Full guide to high-speed dock doors · Everything we do in Egham

For a written price on loading bay work in Egham, request a quote and include photos of the bay if you can.

Call freeGet a quote