- Location
- Emsworth, Hampshire
- Main postcode district
- PO10
- Nearby (straight line)
- Havant (2 miles), Waterlooville (5 miles) and Chichester (7 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What should sites in Emsworth consider?
A warehouse in Emsworth running long shifts with constant forklift traffic puts a lot of cycles through a door, so the drive and its duty rating need to suit. Replacing tired strip curtains is one reason a business in Emsworth might consider a high-speed door, especially where drivers struggle to see through scratched strips.
Food producers in Emsworth with hygiene zones can choose smooth, easily cleaned curtains and frames that suit washdown areas next to the loading dock.
We never ask you to commit before you have a fixed price. A free survey at your Emsworth site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
Should a high-speed door replace our strip curtain or work alongside our dock door?
At very busy openings a high-speed door often replaces a strip curtain, and at external docks it usually works alongside a slower insulated door rather than replacing it.
Strip curtains are inexpensive, but they slow forklifts, scratch quickly and can hide a pedestrian on the other side. A high-speed door clears the opening fully, closes again within seconds and keeps a clear view through its vision panels. See PVC strip curtains if you are weighing up the two.
At external docks, a common arrangement is:
- an insulated sectional door on the outside for security and closing at night,
- a high-speed door just inside it for daytime traffic,
- an interlock so the high-speed door only runs when the outer door is open.
This pairing keeps the building secure out of hours while cutting the time the opening stands open during the working day.
What does a high-speed dock door cost, and why does the price vary so much?
A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.
The main things that move the price are:
- Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
- Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
- Self-repair and breakaway features: worth paying for wherever forklifts pass through.
- Activation: radar, induction loops or pull cords, and how many control points are needed.
- Interlocks: links to an outer door, a leveller or traffic lights.
- Site works: power supply, removing an old door or strip curtain, and access equipment.
Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Asbestos register and any other site hazard information
- Forklift and pallet truck loads crossing the leveller platform
- Temperature requirements for chilled, frozen or ambient goods
- Escape routes and pedestrian doors close to the bay
- Working hours, shift patterns and windows for out-of-hours work
- Bumper position and wear or damage on the dock face
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Insulated double-skin curtain
Two layers of fabric with an air gap or insulation between them, reducing heat or chill loss at openings between temperature zones or at external docks.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Emsworth, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about high-speed dock doors in Emsworth
Can you work alongside our main contractor on a new build in Emsworth?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
What details do you need from us to quote for high-speed dock doors?
To get started, send the site address in Emsworth, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Emsworth site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
What happens if a forklift hits a high-speed door?
On a door with a self-repairing curtain or breakaway bottom bar, the curtain is pushed out of its guides and re-engages on the next cycle, usually with no repair needed. Repeated hard impacts still wear the curtain and guides, so knocks should be logged and checked at the next service visit.
How often should a high-speed door be serviced?
Service frequency should follow how hard the door works, and a busy high-speed door usually needs more visits than a quiet sectional door. We agree a schedule based on cycles per day, the manufacturer's recommendations and any history of impacts. Every visit should include a check of the light curtain, photocells and bottom edge.
High-speed dock doors near Emsworth
Distances are measured from Emsworth. Nearby towns we cover include Havant (2 miles), Waterlooville (5 miles) and Chichester (7 miles), and other towns in the area are covered too.
Other loading bay services in Emsworth
Full guide to high-speed dock doors · Everything we do in Emsworth
If a loading bay in Emsworth needs attention, call us or send photos and details online.