- Location
- Tyldesley, Greater Manchester
- Main postcode district
- M29
- Nearby (straight line)
- Leigh (2 miles), Walkden (3 miles) and Bolton (5 miles)
- Survey and quote
- Free, with a fixed written quote
A high-speed dock door is a power-operated door with a flexible PVC fabric curtain that opens and closes much faster than a conventional sectional door or shutter, usually driven by a frequency-controlled motor. Many versions use a self-repairing curtain or breakaway bottom bar, so a forklift strike pushes the curtain out of its guides instead of wrecking it, and the door re-engages itself on the next cycle.
What should sites in Tyldesley consider?
Busy cross-dock and parcel operations in Tyldesley can use a high-speed door behind the main dock door to keep traffic flowing while limiting the time the bay stands open. Replacing tired strip curtains is one reason a business in Tyldesley might consider a high-speed door, especially where drivers struggle to see through scratched strips.
Whether your site in Tyldesley is a new build or an older unit, we survey the opening, traffic and power before recommending any high-speed door.
If you are planning high-speed dock doors for a site in Tyldesley, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
What does a high-speed dock door cost, and why does the price vary so much?
A high-speed dock door typically costs £6,500 to £14,500 per door, excluding VAT, supply and fit. The range is wide because each door is built to order, and an internal door between two zones is a very different product from one facing an exposed yard.
The main things that move the price are:
- Size and wind exposure: large external openings need reinforced curtains, wind bars or belts and heavier side frames.
- Curtain type: single-skin fabric costs less than an insulated double-skin curtain.
- Self-repair and breakaway features: worth paying for wherever forklifts pass through.
- Activation: radar, induction loops or pull cords, and how many control points are needed.
- Interlocks: links to an outer door, a leveller or traffic lights.
- Site works: power supply, removing an old door or strip curtain, and access equipment.
Our loading bay costs guide sets these figures alongside other dock equipment. After a free site survey you receive a fixed written price.
What does a high-speed door installation need from our site?
A high-speed door installation needs a sound opening to fix the side frames to, a suitable power supply near the door, and the opening taken out of use on the day of fitting.
Before we attend, please make sure:
- a dedicated supply with a local isolator is in place near the door head, or is included in our quote,
- the floor at the threshold is level, as the bottom edge needs a consistent landing,
- stock, racking and vehicles are cleared from both sides of the opening,
- your team has agreed where push buttons, pull cords or radar sensors should sit, based on traffic routes.
On site, engineers working under our management fit the frames and drive unit, hang the curtain, wire the control panel and light curtain, then set opening heights and speeds. Where the door sits behind an existing sectional door, we also wire the interlock so the two doors work in sequence.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Wheel guide positions and yard markings for reversing vehicles
- Traffic routes for vehicles and separation of pedestrians
- Access for deliveries, cranes or lifting equipment during installation
- Lighting inside trailers and at the dock face
- How often each door cycles during a typical shift
- Headroom above the opening and which track type will suit it
Options to discuss
Radar, loop and pull-cord activation
Radar opens the door for approaching forklifts, induction loops respond to vehicles, and pull cords let drivers trigger the door without leaving the truck.
Wind-reinforced external build
Wind bars, tensioned belts and deeper guides keep the curtain in place at exposed external openings, so the door stays reliable when the yard is windy.
Regulations and approvals in England
Sites in Tyldesley fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about high-speed dock doors in Tyldesley
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Tyldesley site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Can you work alongside our main contractor on a new build in Tyldesley?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Is the site survey in Tyldesley free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
What happens if a forklift hits a high-speed door?
On a door with a self-repairing curtain or breakaway bottom bar, the curtain is pushed out of its guides and re-engages on the next cycle, usually with no repair needed. Repeated hard impacts still wear the curtain and guides, so knocks should be logged and checked at the next service visit.
Can a high-speed door be opened in a power cut?
Yes, a high-speed door should have a manual release, crank or counterbalance so it can be opened if the power fails. This reflects the workplace rule that powered doors must be operable by hand where needed for health or safety, unless they open automatically on power failure.
High-speed dock doors near Tyldesley
Looking beyond Tyldesley? Our pages for Leigh (2 miles), Walkden (3 miles) and Bolton (5 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Tyldesley
Full guide to high-speed dock doors · Everything we do in Tyldesley
Call us or request a quote online to talk through loading bay work at your site in Tyldesley.