Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock levellers · Galashiels

Edge-of-dock levellers in Galashiels

Everything to do with edge-of-dock levellers at sites in Galashiels is covered here: how we work, what we check and what you can expect from the process.

Guide £1,800–£4,400 per leveller ex VATFree site surveyTD1
Book a free survey0800 088 6248
Location
Galashiels, Scottish Borders
Main postcode district
TD1
Nearby (straight line)
Hawick (13 miles), Peebles (15 miles) and Bonnyrigg (21 miles)
Survey and quote
Free, with a fixed written quote
Edge-of-dock levellers, in short

An edge-of-dock leveller is a compact leveller mounted on the front face or top edge of a loading dock, with no pit needed. A short hinged plate and lip bridge the gap between dock and trailer, but it can only cover a small height difference above and below dock level, so it suits sites where trailer bed heights are consistent.

What should sites in Galashiels consider?

Companies running their own vehicles in Galashiels, where every trailer has a known bed height, are well placed to use edge-of-dock levellers instead of pit units. If trailer heights at a site in Galashiels vary widely, our survey will tell you plainly whether an edge-of-dock leveller can cope or a pit leveller is needed.

Replacing loose bridge plates at a dock in Galashiels with a fixed edge-of-dock leveller removes the need to lift and position heavy plates by hand.

Our part of the job in Galashiels is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.

How is an edge-of-dock leveller fitted to an existing dock?

An edge-of-dock leveller is fixed to the front face or top edge of the dock from the yard side, and installation usually takes around half a day to a day per bay. No digging is involved.

  1. The dock face is inspected, and damaged concrete or worn edge steel is repaired or replaced first if needed.
  2. The leveller is positioned centrally on the door opening and bolted or welded in place.
  3. Bumpers are fitted or repositioned so trailers stop at the right distance from the plate.
  4. On hydraulic units, the power pack and controls are connected.
  5. The leveller is tested across its working range.

You will need to keep the yard approach to the bay clear, take the bay out of use and, for hydraulic units, provide a power supply near the door or ask us to include one. Because the work is outside, very wet or freezing weather can affect welding and fixing, so we keep the date flexible where we can.

How much does an edge-of-dock leveller cost?

An edge-of-dock leveller typically costs £1,800 to £4,400 per leveller, excluding VAT, supply and fit. That is considerably less than a pit leveller, because there is no pit to form or maintain and the unit itself is smaller.

The price depends on:

  • Operation: mechanical units with a lever and spring assistance cost less than hydraulic push-button units.
  • Width and capacity: wider plates and higher ratings for heavier forklifts.
  • Fixing method: bolting to sound concrete, welding to an existing steel edge, or fitting a new edge angle first.
  • Dock face condition: spalled or damaged concrete may need repair before fixing.
  • Bumpers: often replaced or repositioned at the same time.
  • Power: hydraulic units need a supply at the bay.

Concrete repairs or new edge steel are priced as separate items after survey, so you can see exactly what the leveller costs on its own. The written quote is the fixed price.

Guide price, Galashiels
£1,800–£4,400 per leveller, ex VAT

The same published guide range applies across Scotland; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

  • Wheel guide positions and yard markings for reversing vehicles
  • Power supply at each bay, including three-phase availability
  • Whether planning, building control or a building warrant may be needed
  • Access for deliveries, cranes or lifting equipment during installation
  • Working hours, shift patterns and windows for out-of-hours work
  • Headroom above the opening and which track type will suit it

Options to discuss

Mechanical edge-of-dock leveller

Lever-operated with spring assistance and no power supply needed. Suits low-volume bays and sites with consistent trailers where simplicity matters most.

Wider or heavy-duty plate

A wider plate or higher rating for larger forklifts, heavy loads or pallet trucks with a wide wheel track, specified after we look at your equipment.

Which rules apply in Scotland?

Doors and dock equipment installed in Scotland may carry the UKCA or the CE mark, and we pass on the documentation for everything fitted in Galashiels. Because building warrant and planning questions can affect the programme, we check what applies at survey and raise any approvals early rather than assuming none are needed.

Questions about edge-of-dock levellers in Galashiels

Is VAT included in your guide prices for edge-of-dock levellers?

No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in the Scottish Borders as everywhere else: for edge-of-dock levellers, it is £1,800 to £4,400 per leveller, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.

Is the site survey in Galashiels free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

What details do you need from us to quote for edge-of-dock levellers?

To get started, send the site address in Galashiels, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Does the dock door still close with the leveller fitted?

Yes, in most layouts. Edge-of-dock levellers sit at the outer edge of the dock and store with the lip raised or folded, so the door closes behind them as normal. We check the clearance between the door, its bottom seal and the stored leveller at survey.

Can edge-of-dock levellers be used with vans?

Usually not. Edge-of-dock levellers are designed for trailers whose beds sit close to dock height, and many vans sit well below a typical dock, beyond the leveller's range. A lift table or a ground-level door is normally the better way to handle vans.

Edge-of-dock levellers near Galashiels

The same survey, quote and repair service is available in towns around Galashiels, such as Hawick (13 miles), Peebles (15 miles) and Bonnyrigg (21 miles).

Other loading bay services in Galashiels

Full guide to edge-of-dock levellers · Everything we do in Galashiels

Get in touch about loading bay doors and dock equipment in Galashiels: call, email or use the quote tool.

Call freeGet a quote