- Location
- Darwen, Lancashire
- Main postcode district
- BB3
- Nearby (straight line)
- Blackburn (4 miles), Haslingden (6 miles) and Accrington (6 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
Where does this fit at a dock in Darwen?
Sites around Darwen that run night shifts often find traffic lights easier for drivers to read than staff waving or knocking on the cab door. If a site in Darwen has had door panels damaged by levellers raised too early, a leveller-to-door interlock is a straightforward fix to consider.
Whether your unit in Darwen has one dock or twenty, the survey looks at each bay's existing controls before we quote a fixed price in writing.
The survey is free, the quote is written and the price is fixed: that is how every installation in Darwen begins. We then manage the work from start to finish. Fitting is carried out by specialist installers under our management, phased so the operation keeps moving, and nights or weekends can be booked by arrangement. On the final day we test the equipment with you and hand over the operating and maintenance information.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
What happens on site when traffic lights and interlocks are fitted?
Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.
- Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
- Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
- Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
- Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
- Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.
It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Access for deliveries, cranes or lifting equipment during installation
- Dock height and the mix of trailers you load
- Wall and steel structure for door, shelter and bumper fixings
- Condition of any existing leveller pit, kerb angles and pit drainage
- How often each door cycles during a typical shift
- Forklift and pallet truck loads crossing the leveller platform
Options to discuss
Door-linked lights
Lights that change automatically with the door position, using a door switch or a signal from the door control panel, so the outside light turns red as the door opens.
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Planning, building control and safety law in England
Sites in Darwen fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about dock traffic lights and interlocks in Darwen
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Darwen site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Can you work outside our normal operating hours in Darwen?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Can you work alongside our main contractor on a new build in Darwen?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Which way round do the inside and outside lights work?
The inside and outside lights always show opposite colours. While a trailer is being loaded, the outside light is red so the driver stays put and the inside light is green so staff can work. When loading is finished and the door is closed, the inside light turns red and the outside light turns green for the driver.
Are dock traffic lights enough on their own to stop drive-away?
Traffic lights on their own are a signal, not a physical barrier, so they depend on drivers obeying them. HSE lists traffic lights among the measures against early drive-away, and many sites combine them with key or paperwork control or with a vehicle restraint. The right combination should come from your workplace transport risk assessment.
Dock traffic lights and interlocks near Darwen
We also cover towns near Darwen, including Blackburn (4 miles), Haslingden (6 miles) and Accrington (6 miles). Each has its own page with the same services and process.
Other loading bay services in Darwen
Full guide to dock traffic lights and interlocks · Everything we do in Darwen
For a written price on loading bay work in Darwen, request a quote and include photos of the bay if you can.