- Location
- Herne Bay, Kent
- Main postcode district
- CT6
- Nearby (straight line)
- Whitstable (5 miles), Canterbury (7 miles) and Faversham (11 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
Where does this fit at a dock in Herne Bay?
Food and chilled operations around Herne Bay with inflatable shelters often add interlocks so the shelter only inflates once a trailer is docked and restrained. Sites around Herne Bay that run night shifts often find traffic lights easier for drivers to read than staff waving or knocking on the cab door.
Older docks in Herne Bay with separate door and leveller controls can be brought into a proper sequence by adding interlocks that stop equipment working out of order.
We keep the process simple for sites in Herne Bay. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.
What happens on site when traffic lights and interlocks are fitted?
Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.
- Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
- Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
- Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
- Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
- Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.
It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.
Which interlocks should a loading bay have?
The most useful loading bay interlocks stop the door opening until the trailer is in place or restrained, and stop the leveller operating until the door is fully open. Beyond that, the right set depends on the equipment fitted and your risk assessment.
- Door to restraint: the door cannot open until the restraint is engaged or a trailer is detected.
- Leveller to door: the leveller cannot be raised until the door is fully open, which prevents the lip hitting door panels.
- Door to leveller: the door cannot close until the leveller is back in its parked position.
- Restraint release: the restraint only releases once the door is closed and the leveller parked.
- Shelter to trailer: an inflatable shelter only inflates when a trailer is docked.
On a bay without a restraint, a trailer presence sensor can take its place in the door logic, although it confirms a trailer is there rather than holding it. Combining interlocks with vehicle restraints gives the strongest protection against drive-away.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Scope to convert ground-level doors into docks or add lift tables
- Dock height and the mix of trailers you load
- Access for deliveries, cranes or lifting equipment during installation
- Asbestos register and any other site hazard information
- Wall and steel structure for door, shelter and bumper fixings
- Traffic routes for vehicles and separation of pedestrians
Options to discuss
Door-linked lights
Lights that change automatically with the door position, using a door switch or a signal from the door control panel, so the outside light turns red as the door opens.
Trailer presence sensors
Sensors that detect a trailer on the bay, used to switch lights, enable the door or trigger an inflatable shelter where no restraint is fitted.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Herne Bay, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about dock traffic lights and interlocks in Herne Bay
Do you cover Herne Bay for dock traffic lights and interlocks?
Yes. We take on dock traffic lights and interlocks for businesses in Herne Bay and across Kent. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
How do you price dock traffic lights and interlocks for a site in Herne Bay?
Guide budgets for supply and fit are £650 to £3,400 per bay, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Is the site survey in Herne Bay free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
Do traffic lights and interlocks need maintenance?
Yes. Lights, sensors and interlocks should be checked at each planned service visit, including testing the full sequence and confirming that steps attempted out of order are blocked. As part of the dock equipment they fall under PUWER, which requires work equipment to be maintained in a safe condition.
Will interlocks slow down my loading operation?
Interlocks add a fixed sequence, but each step takes only moments and staff soon get used to it. In practice many sites find the sequence saves time overall, because there are fewer arguments about when to open the door and less damage from levellers being raised into part-open doors.
Dock traffic lights and interlocks near Herne Bay
Sites close to Herne Bay get the same service, including those in Whitstable (5 miles), Canterbury (7 miles) and Faversham (11 miles), with every job run the same way.
Other loading bay services in Herne Bay
Full guide to dock traffic lights and interlocks · Everything we do in Herne Bay
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Herne Bay.