- Location
- Ashford, Kent
- Main postcode district
- TN24
- Nearby (straight line)
- Faversham (12 miles), Canterbury (13 miles) and Folkestone (13 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
How does this suit sites in Ashford?
Distribution centres near Ashford taking trailers from many different hauliers benefit from a signal every driver understands, regardless of language or familiarity with the site. Food and chilled operations around Ashford with inflatable shelters often add interlocks so the shelter only inflates once a trailer is docked and restrained.
Loading docks in Ashford where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay.
Our part of the job in Ashford is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
Can traffic lights and interlocks be added to older loading bays?
Yes, traffic lights and interlocks can be added to most older loading bays, although some need new control panels before the interlocks can work.
- Manual doors: a door position switch can confirm the door is fully open or closed, which lets lights and leveller interlocks work even without a motor.
- Older powered doors and levellers: basic control boxes may not have connections for interlocks, so a combined bay panel can replace separate controls.
- Mixed equipment: doors and levellers from different suppliers can usually be brought under one interlock panel, so every bay works the same way.
Interlocks cannot make faulty equipment safe. If a door or leveller has a defect, it should be repaired before interlocks are added, and the survey will flag anything we find. Upgrading lights and interlocks at the same time as replacing a door or leveller is often the most economical moment to do it.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- How often each door cycles during a typical shift
- Temperature requirements for chilled, frozen or ambient goods
- Access for deliveries, cranes or lifting equipment during installation
- Escape routes and pedestrian doors close to the bay
- Headroom above the opening and which track type will suit it
- How drivers are prevented from pulling away too early
Options to discuss
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Full bay interlock panel
A single control panel that runs the door, leveller, restraint and shelter in the correct sequence, with indicators showing which step is active or blocked.
Which rules apply in England?
Sites in Ashford fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about dock traffic lights and interlocks in Ashford
How long does installation take at a site in Ashford?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Which building and safety rules apply to a site in Ashford?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Ashford, we check what applies at survey and design to it.
Is VAT included in your guide prices for dock traffic lights and interlocks?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Kent as everywhere else: for dock traffic lights and interlocks, it is £650 to £3,400 per bay, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Do traffic lights and interlocks need maintenance?
Yes. Lights, sensors and interlocks should be checked at each planned service visit, including testing the full sequence and confirming that steps attempted out of order are blocked. As part of the dock equipment they fall under PUWER, which requires work equipment to be maintained in a safe condition.
Can you add lights and interlocks across a whole dock in one project?
Yes. A whole-dock project is usually phased bay by bay so most doors stay in use, and every bay ends up on the same control standard. That consistency makes training easier for staff and drivers, and it simplifies servicing because every bay behaves in the same way.
Dock traffic lights and interlocks near Ashford
Looking beyond Ashford? Our pages for Faversham (12 miles), Canterbury (13 miles) and Folkestone (13 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Ashford
Full guide to dock traffic lights and interlocks · Everything we do in Ashford
Tell us what is happening at your Ashford dock, what equipment is there and when it is used, and we will suggest the right next step.