- Location
- Fleet, Hampshire
- Main postcode districts
- GU51 and GU52
- Nearby (straight line)
- Farnborough (3 miles), Aldershot (4 miles) and Yateley (4 miles)
- Survey and quote
- Free, with a fixed written quote
Dock traffic lights are red and green signals mounted outside and inside a loading bay to tell the driver and dock staff when it is safe to move or load. Interlocks are control links that stop equipment operating out of sequence, for example preventing the door opening until the trailer is restrained, or the leveller operating until the door is fully open.
Why do sites in Fleet choose this?
Whether your unit in Fleet has one dock or twenty, the survey looks at each bay's existing controls before we quote a fixed price in writing. Loading docks in Fleet where drivers wait in their cabs for a hand signal can replace guesswork with a clear red and green light at every bay.
New warehouses in Fleet can have lights and interlocks wired in during the electrical fit-out, avoiding retrofit cabling and keeping every bay on one control standard.
We do not give a fixed price without seeing the site. A free survey in Fleet lets us check the details that affect the job, and the written quote that follows is a fixed price for the agreed scope. We plan the work around your operation, arrange out-of-hours access if you need it and manage specialist installation engineers throughout. Handover includes testing, a demonstration and the paperwork you need for your records.
How do inside and outside dock traffic lights work together?
Inside and outside dock lights always show opposite colours: when the driver sees red, dock staff see green, and the other way round. Each light is aimed at a different person, so each one only ever gives one instruction.
- Outside light, facing the driver: red means stay on the bay because loading is in progress; green means the bay is clear to leave or to reverse on to.
- Inside light, facing dock staff: green means the trailer is in place and it is safe to open the door and load; red means do not open the door or enter the trailer.
Lights can be switched in three main ways:
- Manually, by a switch beside the door, relying on dock staff to change it at the right moment.
- By door position, so opening the door automatically turns the outside light red.
- By the restraint, so the light only changes when the trailer is physically held.
What happens on site when traffic lights and interlocks are fitted?
Fitting lights and interlocks is mainly electrical work, and each bay is out of use while its controls are connected and tested. Working bay by bay keeps the rest of the dock running.
- Fix the signals: the outside light is mounted on brackets at a height drivers can see, and the inside light beside the door.
- Run the cables: wiring is run in conduit or trunking between lights, sensors and control panels.
- Isolate and connect: the door and leveller supplies are isolated and locked off while the interlock wiring is connected, or a new bay panel is fitted.
- Test every sequence: each interlock is tested, including what happens if a step is attempted out of order.
- Brief staff: dock staff are shown the new sequence, and signs are fitted for drivers.
It helps if you can provide any electrical drawings for the dock, access to the distribution board, a person who can authorise isolations and an agreed order for releasing bays.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Escape routes and pedestrian doors close to the bay
- Clear opening width and height for each door
- Lighting inside trailers and at the dock face
- Bumper position and wear or damage on the dock face
- How drivers are prevented from pulling away too early
- Access for deliveries, cranes or lifting equipment during installation
Options to discuss
Standalone LED traffic lights
A red and green pair for each bay, one outside for the driver and one inside for dock staff, switched manually from a control beside the door.
Full bay interlock panel
A single control panel that runs the door, leveller, restraint and shelter in the correct sequence, with indicators showing which step is active or blocked.
Regulations and approvals in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Fleet. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about dock traffic lights and interlocks in Fleet
What details do you need from us to quote for dock traffic lights and interlocks?
To get started, send the site address in Fleet, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Do you cover Fleet for dock traffic lights and interlocks?
Yes. We take on dock traffic lights and interlocks for businesses in Fleet and across Hampshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Can you work alongside our main contractor on a new build in Fleet?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Which way round do the inside and outside lights work?
The inside and outside lights always show opposite colours. While a trailer is being loaded, the outside light is red so the driver stays put and the inside light is green so staff can work. When loading is finished and the door is closed, the inside light turns red and the outside light turns green for the driver.
Are dock traffic lights enough on their own to stop drive-away?
Traffic lights on their own are a signal, not a physical barrier, so they depend on drivers obeying them. HSE lists traffic lights among the measures against early drive-away, and many sites combine them with key or paperwork control or with a vehicle restraint. The right combination should come from your workplace transport risk assessment.
Dock traffic lights and interlocks near Fleet
Looking beyond Fleet? Our pages for Farnborough (3 miles), Aldershot (4 miles) and Yateley (4 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Fleet
Full guide to dock traffic lights and interlocks · Everything we do in Fleet
Tell us what is happening at your Fleet dock, what equipment is there and when it is used, and we will suggest the right next step.