- Location
- Taunton, Somerset
- Main postcode district
- TA1
- Nearby (straight line)
- Bridgwater (9 miles), Burnham-on-Sea (16 miles) and Tiverton (19 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
Where does this fit at a dock in Taunton?
Exposed yards in Taunton that catch strong winds can tear shelter curtains or strain frames, letting weather into the dock until parts are replaced. Inflatable shelters at food sites in Taunton depend on blowers and airbags working properly, and a slow-inflating shelter is worth checking before it fails.
Older retractable shelters on estates around Taunton can often be refurbished with new curtains and pads rather than replaced, provided the frame is still sound.
When something stops working at a loading bay in Taunton, contact us with a description and, ideally, photos. We will confirm the cost of the visit in writing before booking anyone. If the engineer finds the problem goes further than expected, you receive a quote for the additional work and decide whether to proceed. Every visit is followed by a written report you can keep with your maintenance records.
Should I repair my dock shelter or change to a different type?
Repair is usually right when the shelter or seal still suits your trailers and the damage is wear and tear. Changing type is worth considering when the same damage keeps recurring because the equipment no longer suits the vehicles arriving.
- Repair: curtains torn by normal use, worn pad covers, a failed blower or a single bent frame arm.
- Resize: head curtains or pads that are too short for taller trailers now in your fleet.
- Seal to shelter: foam seals suit consistent trailer sizes; a mixed fleet or curtain-siders may need a shelter instead.
- Retractable to inflatable: chilled or frozen docks that need a tighter seal around varied trailers.
- Frame type: shelters repeatedly bent by trailers may suit a retractable frame that gives on impact.
Any change of type is quoted separately from the repair. Our guide to dock shelters vs dock seals explains how each type works and which trailers it suits.
How much does a dock shelter or seal repair cost?
A dock shelter or seal repair typically costs £380 to £1,800 per repair, excluding VAT. A pair of side curtains or seal pad covers sits towards the lower end; a full curtain set, a new frame or a set of airbags with a blower sits towards the top.
How the price is agreed:
- You describe the damage and send photos, ideally with a trailer docked.
- We agree the visit price in writing before anyone attends. Where parts are made to measure, that may cover a measuring visit and a fitting visit.
- Any extra work found on site is quoted and approved by you before it is done.
What moves the price:
- Parts: curtains, pads, airbags, blowers and frames differ widely in cost.
- Size: taller and wider shelters need more material.
- Access: head curtains and top pads may need powered access equipment.
- Number of bays and timing: several bays together lower the cost per bay; out-of-hours work adds to it.
VAT is added at the standard rate.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Bay checks on a repair or service visit
- Wiring, isolators and motor performance under load
- Dock bumpers for missing rubber or loose fixings
- Leveller toe guards and side skirting, where fitted
- Lip hinge, lip extension and lip support operation
- Track alignment, rollers and wall fixings
- Pit frame welds, platform cracks and structural damage
Options to discuss
Airbag and blower repairs
Repairing or replacing torn airbags, failed blower motors and controls on inflatable shelters so the bags inflate fully and seal around the trailer again.
Curtain replacement
New side and head curtains for retractable shelters, made to measure in hard-wearing coated fabric, with slits and overlaps set to suit the trailers you receive.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Taunton. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.
Questions about dock shelter and seal repairs in Taunton
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Do you cover Somerset for dock shelter and seal repairs?
Yes. We take on dock shelter and seal repairs for sites in Taunton and throughout Somerset. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
Why do shelter curtains keep tearing?
Shelter curtains usually keep tearing because trailers arrive off-centre, the curtains are too short or tight for the trailers now in use, or worn bumpers let trailers reverse too far in. Fixing the cause, for example with wheel guides or resized curtains, stops repeat damage.
Can repairs help a chilled loading bay?
Yes. Gaps around a docked trailer let chilled air escape and warm, moist air in, which causes condensation and ice on the dock floor. Restoring the curtains, pads or airbags closes those gaps, helping keep the dock drier and safer to work in.
Dock shelter and seal repairs near Taunton
We also cover towns near Taunton, including Bridgwater (9 miles), Burnham-on-Sea (16 miles) and Tiverton (19 miles). Each has its own page with the same services and process.
Other loading bay services in Taunton
Full guide to dock shelter and seal repairs · Everything we do in Taunton
Ready to talk about a loading bay in Taunton? Call us, or send the details through the quote form.