- Location
- Lerwick, Orkney, Shetland and the Western Isles
- Main postcode district
- ZE1
- Nearby (straight line)
- Remote location, covered by arrangement
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
What should sites in Lerwick consider?
Chilled distribution sites around Lerwick tend to notice failing seals quickly, as gaps around the trailer cause condensation and ice on the dock floor. Exposed yards in Lerwick that catch strong winds can tear shelter curtains or strain frames, letting weather into the dock until parts are replaced.
Older retractable shelters on estates around Lerwick can often be refurbished with new curtains and pads rather than replaced, provided the frame is still sound.
Tell us what has gone wrong at your Lerwick site and, if you can, send photos of the fault and any labels on the equipment. We then confirm the visit price in writing, and nobody attends until you have agreed it. On site, the engineer diagnoses and repairs what was agreed; anything extra is quoted first, never added without your say-so. A written report follows, covering findings, work carried out and recommendations.
Should I repair my dock shelter or change to a different type?
Repair is usually right when the shelter or seal still suits your trailers and the damage is wear and tear. Changing type is worth considering when the same damage keeps recurring because the equipment no longer suits the vehicles arriving.
- Repair: curtains torn by normal use, worn pad covers, a failed blower or a single bent frame arm.
- Resize: head curtains or pads that are too short for taller trailers now in your fleet.
- Seal to shelter: foam seals suit consistent trailer sizes; a mixed fleet or curtain-siders may need a shelter instead.
- Retractable to inflatable: chilled or frozen docks that need a tighter seal around varied trailers.
- Frame type: shelters repeatedly bent by trailers may suit a retractable frame that gives on impact.
Any change of type is quoted separately from the repair. Our guide to dock shelters vs dock seals explains how each type works and which trailers it suits.
How much does a dock shelter or seal repair cost?
A dock shelter or seal repair typically costs £380 to £1,800 per repair, excluding VAT. A pair of side curtains or seal pad covers sits towards the lower end; a full curtain set, a new frame or a set of airbags with a blower sits towards the top.
How the price is agreed:
- You describe the damage and send photos, ideally with a trailer docked.
- We agree the visit price in writing before anyone attends. Where parts are made to measure, that may cover a measuring visit and a fitting visit.
- Any extra work found on site is quoted and approved by you before it is done.
What moves the price:
- Parts: curtains, pads, airbags, blowers and frames differ widely in cost.
- Size: taller and wider shelters need more material.
- Access: head curtains and top pads may need powered access equipment.
- Number of bays and timing: several bays together lower the cost per bay; out-of-hours work adds to it.
VAT is added at the standard rate.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Previous service and inspection records, where available
- Shelter curtains, frames and side pads for tears
- Wiring, isolators and motor performance under load
- Manual override and emergency operation on powered doors
- Safety edges, photocells and light curtains
- Leveller toe guards and side skirting, where fitted
Options to discuss
Seal pad refurbishment
Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.
Top pad and guide strip replacement
Renewing head pads, top seals and high-visibility guide strips that close the gap above the trailer and help drivers line up on the bay.
Planning, building control and safety law in Scotland
In Scotland, building work such as forming a new opening or a dock leveller pit may need a building warrant from the local authority before it starts. For sites in Lerwick, external structures such as loading houses or canopies may also need planning permission from the council. We check what applies before any work starts and factor any approvals into the programme.
If equipment needs attention at a site in Lerwick, the visit is arranged in advance and its price, including travel and any accommodation, is agreed before anyone sets off. Photos from your team help us bring the right parts first time.
Questions about dock shelter and seal repairs in Lerwick
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Lerwick, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
How is a repair or service visit in Lerwick priced?
Repair and service visits are chargeable, and the price is agreed in writing before anyone attends. For dock shelter and seal repairs, the guide budget is £380 to £1,800 per repair, excluding VAT. The exact figure depends on the fault, parts, access and timing. If the engineer finds further work on the day, it is quoted for your approval before it is carried out.
How is the price for a shelter or seal repair agreed?
You describe the damage and send photos, and we agree the visit price in writing before anyone attends. For made-to-measure parts that may include a measuring visit. Any extra work found on site is quoted and only carried out once you approve it.
Can you replace just the curtains on a dock shelter?
Yes. If the frame is still sound, the side and head curtains can be replaced on their own, which is the most common shelter repair. Curtains are usually made to measure, so the shelter is measured first and the new curtains fitted on a second visit, with both visits priced in advance.
Dock shelter and seal repairs near Lerwick
Other loading bay services in Lerwick
Full guide to dock shelter and seal repairs · Everything we do in Lerwick
Request a quote for your loading bay in Lerwick, attaching photos of the dock, the equipment and any damage.