Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Repairs and servicing · Fareham

Dock shelter and seal repairs in Fareham

Looking for dock shelter and seal repairs in Fareham? We cover sites throughout Hampshire, from single loading bays to multi-door distribution buildings, and keep you informed at every stage of the work.

Guide £380–£1,800 per repair ex VATVisit priced before we attendPO16
Book a visit0800 088 6248
Location
Fareham, Hampshire
Main postcode district
PO16
Nearby (straight line)
Gosport (4 miles), Portsmouth (5 miles) and Hedge End (7 miles)
Visit pricing
Agreed in writing before we attend
Dock shelter and seal repairs, in short

Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.

What should sites in Fareham consider?

Curtains tearing at the corners at docks in Fareham can be a sign that taller or wider trailers are arriving than the shelter was sized for. If tenants change at a unit in Fareham, checking the shelters and seals is sensible, because a new fleet may not suit the old curtain sizes.

Multi-bay sites near Fareham often find several shelters in similar condition, so measuring and replacing curtains across the dock in one programme can reduce costs.

Servicing and repairs work slightly differently from installations. Visits to sites in Fareham are chargeable, and the price is set out in writing before anyone comes out. To help us prepare, send photos of the equipment and the fault. The engineer carries out the agreed work, flags anything else that needs attention and quotes it before touching it. Afterwards, a written report records the condition of each item.

Why is my dock shelter or seal letting in draughts?

A dock shelter or seal lets in draughts when the material that should press against the trailer is torn, worn, too short or no longer in the right place. Daylight around a docked trailer is the clearest sign.

  • Torn or shrunk curtains: side curtains no longer overlap the trailer sides.
  • Short head curtain: taller trailers than the shelter was sized for leave a gap across the top.
  • Flattened seal pads: foam that has lost its spring no longer closes the gap.
  • Worn pad covers: exposed foam soaks up water and breaks down faster.
  • Bent frame: a retractable shelter frame that no longer returns square.
  • Airbag or blower fault: inflatable shelters that inflate slowly or lose pressure.
  • Trailer position: off-centre parking or worn bumpers that let trailers crush one side.

On chilled docks, gaps also show up as condensation, ice on the dock floor or frost around the door.

How much does a dock shelter or seal repair cost?

A dock shelter or seal repair typically costs £380 to £1,800 per repair, excluding VAT. A pair of side curtains or seal pad covers sits towards the lower end; a full curtain set, a new frame or a set of airbags with a blower sits towards the top.

How the price is agreed:

  1. You describe the damage and send photos, ideally with a trailer docked.
  2. We agree the visit price in writing before anyone attends. Where parts are made to measure, that may cover a measuring visit and a fitting visit.
  3. Any extra work found on site is quoted and approved by you before it is done.

What moves the price:

  • Parts: curtains, pads, airbags, blowers and frames differ widely in cost.
  • Size: taller and wider shelters need more material.
  • Access: head curtains and top pads may need powered access equipment.
  • Number of bays and timing: several bays together lower the cost per bay; out-of-hours work adds to it.

VAT is added at the standard rate.

Guide price, Fareham
£380–£1,800 per repair, ex VAT

The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.

What else does the engineer check at the bay?

  • Vehicle restraint engagement and its signal sequence
  • Door panels, side seals and bottom rubbers
  • Lip hinge, lip extension and lip support operation
  • Hydraulic oil level, hoses and cylinders for leaks
  • Leveller toe guards and side skirting, where fitted
  • Shelter curtains, frames and side pads for tears

Options to discuss

Seal pad refurbishment

Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.

Airbag and blower repairs

Repairing or replacing torn airbags, failed blower motors and controls on inflatable shelters so the bags inflate fully and seal around the trailer again.

Planning, building control and safety law in England

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Fareham. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.

Questions about dock shelter and seal repairs in Fareham

Can you take over our existing loading bay maintenance arrangement?

Yes. Send us a list of the equipment at your Fareham site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.

What is the difference between servicing and a statutory inspection?

Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.

Can you repair all makes of loading bay equipment?

We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Fareham. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.

Why do shelter curtains keep tearing?

Shelter curtains usually keep tearing because trailers arrive off-centre, the curtains are too short or tight for the trailers now in use, or worn bumpers let trailers reverse too far in. Fixing the cause, for example with wheel guides or resized curtains, stops repeat damage.

Do you repair inflatable dock shelters?

Yes. We repair and replace torn airbags, failed blower motors, controls and fixings on inflatable shelters. Where the shelter is interlocked with the dock controls so it only inflates with a trailer present, that link is checked as part of the repair.

Dock shelter and seal repairs near Fareham

Looking beyond Fareham? Our pages for Gosport (4 miles), Portsmouth (5 miles) and Hedge End (7 miles) describe the same loading bay services and how to get in touch.

Other loading bay services in Fareham

Full guide to dock shelter and seal repairs · Everything we do in Fareham

Start your enquiry for Fareham through the quote tool. A few photos and approximate sizes help us respond with something useful.

Call freeGet a quote