- Location
- Portslade, East Sussex
- Main postcode district
- BN41
- Nearby (straight line)
- Hove (2 miles), Shoreham-by-Sea (3 miles) and Brighton (3 miles)
- Visit pricing
- Agreed in writing before we attend
Dock shelter and seal repair covers restoring the weather seal around a docked trailer. Typical work includes replacing torn side and head curtains, worn foam seal pads and their covers, top pads and guide strips, repairing or replacing airbags and blowers on inflatable shelters, and straightening or replacing bent shelter frames, so the bay closes the gap between building and trailer again.
How does this suit sites in Portslade?
Exposed yards in Portslade that catch strong winds can tear shelter curtains or strain frames, letting weather into the dock until parts are replaced. Curtains tearing at the corners at docks in Portslade can be a sign that taller or wider trailers are arriving than the shelter was sized for.
If tenants change at a unit in Portslade, checking the shelters and seals is sensible, because a new fleet may not suit the old curtain sizes.
Servicing and repairs work slightly differently from installations. Visits to sites in Portslade are chargeable, and the price is set out in writing before anyone comes out. To help us prepare, send photos of the equipment and the fault. The engineer carries out the agreed work, flags anything else that needs attention and quotes it before touching it. Afterwards, a written report records the condition of each item.
Do dock shelters and seals fall under PUWER?
Yes. Dock shelters and seals are work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so they must be suitable, maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
Shelter and seal damage is often treated as a comfort or energy issue, but some faults are safety issues too:
- loose head curtains, top pads or fixings that could fall;
- bent or broken frame arms with sharp edges at head height;
- wet or icy dock floors caused by gaps around the trailer;
- electrical faults on inflatable shelter blowers.
The regulator is HSE in Great Britain and HSENI in Northern Ireland. Including shelters and seals in planned maintenance, and recording what is found, shows they are being kept in a safe condition. Problems found during servicing are quoted as repairs before any work is done.
Should I repair my dock shelter or change to a different type?
Repair is usually right when the shelter or seal still suits your trailers and the damage is wear and tear. Changing type is worth considering when the same damage keeps recurring because the equipment no longer suits the vehicles arriving.
- Repair: curtains torn by normal use, worn pad covers, a failed blower or a single bent frame arm.
- Resize: head curtains or pads that are too short for taller trailers now in your fleet.
- Seal to shelter: foam seals suit consistent trailer sizes; a mixed fleet or curtain-siders may need a shelter instead.
- Retractable to inflatable: chilled or frozen docks that need a tighter seal around varied trailers.
- Frame type: shelters repeatedly bent by trailers may suit a retractable frame that gives on impact.
Any change of type is quoted separately from the repair. Our guide to dock shelters vs dock seals explains how each type works and which trailers it suits.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What we look at around the bay
- Safety edges, photocells and light curtains
- Door springs, cables and drums for wear or damage
- Leveller toe guards and side skirting, where fitted
- Track alignment, rollers and wall fixings
- Previous service and inspection records, where available
- Anti-fall device on upward-opening doors
Options to discuss
Frame repairs
Straightening or replacing bent arms, springs and frames on retractable shelters damaged by off-centre trailers, so the shelter returns square after each docking.
Seal pad refurbishment
Replacing worn foam pads, or just their covers where the foam is still sound, including tougher facings on the areas where trailers rub most.
What do the rules in England mean for the work?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Portslade. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.
Questions about dock shelter and seal repairs in Portslade
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in Portslade. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
How is a repair or service visit in Portslade priced?
Repair and service visits are chargeable, and the price is agreed in writing before anyone attends. For dock shelter and seal repairs, the guide budget is £380 to £1,800 per repair, excluding VAT. The exact figure depends on the fault, parts, access and timing. If the engineer finds further work on the day, it is quoted for your approval before it is carried out.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
How is the price for a shelter or seal repair agreed?
You describe the damage and send photos, and we agree the visit price in writing before anyone attends. For made-to-measure parts that may include a measuring visit. Any extra work found on site is quoted and only carried out once you approve it.
Can repairs help a chilled loading bay?
Yes. Gaps around a docked trailer let chilled air escape and warm, moist air in, which causes condensation and ice on the dock floor. Restoring the curtains, pads or airbags closes those gaps, helping keep the dock drier and safer to work in.
Dock shelter and seal repairs near Portslade
Distances are measured from Portslade. Nearby towns we cover include Hove (2 miles), Shoreham-by-Sea (3 miles) and Brighton (3 miles), and other towns in the area are covered too.
Other loading bay services in Portslade
Full guide to dock shelter and seal repairs · Everything we do in Portslade
Tell us what is happening at your Portslade dock, what equipment is there and when it is used, and we will suggest the right next step.