Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock safety · March

Dock bumpers in March

In March, as in other parts of Cambridgeshire, we offer dock bumpers with clear communication, careful planning and work organised around your operation.

Guide £120–£480 per bumper ex VATFree site surveyPE15
Book a free survey0800 088 6248
Location
March, Cambridgeshire
Main postcode district
PE15
Nearby (straight line)
Wisbech (8 miles), Ely (13 miles) and Peterborough (14 miles)
Survey and quote
Free, with a fixed written quote
Dock bumpers, in short

Dock bumpers are rubber or rubber-and-steel buffers fixed to the face of a loading dock, either side of the leveller, to absorb the impact of reversing vehicles. They hold the trailer a set distance from the building, protect the dock wall, leveller and door, and help a dock seal or shelter compress evenly. Most bays use two bumpers, replaced as they wear.

What should sites in March consider?

Chilled and food distribution operations in March depend on dock seals compressing evenly, which only happens when the bumpers behind them are still the correct depth. We survey and quote for dock bumper work in March on the same basis as anywhere else in the UK, with the price fixed in a written quote.

Sites near March handling a mix of articulated trailers, rigid vehicles and vans may need taller bumpers or a second lower pair to protect the dock face.

Your loading bay stays our responsibility from the survey to the handover. In March, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.

How much do dock bumpers cost?

Dock bumpers typically cost £120 to £480 per bumper, supplied and fitted, excluding VAT. Most bays need two, so the cost per dock depends mainly on the type of bumper and how it is fixed.

The main things that move the price are:

  • Bumper type: laminated rubber is the most economical; moulded, steel-faced and vertical sliding designs cost more.
  • Size and projection: deeper or taller bumpers use more material and heavier fixings.
  • Fixing method: anchoring into sound concrete is simpler than welding to steel embeds or repairing a broken dock face first.
  • Number of bays: doing several docks in one visit spreads access and travel costs.
  • Working hours and location: out-of-hours working and remote or island sites add cost, and any travel cost is shown in the quote.

These are guide budgets. After a free site survey we send a written quote, and that quote is the fixed price. VAT is added at the standard rate.

What happens on site when dock bumpers are fitted?

Fitting dock bumpers is a short job carried out from yard level, and only the bay being worked on is taken out of use.

  1. Isolate the bay: no trailer on the dock, the leveller parked and the door closed, with the yard area in front coned off.
  2. Remove the old bumpers: worn units and corroded fixings are taken off and the dock face is checked for cracked or spalled concrete.
  3. Fix the new bumpers: holes are drilled and the bumpers secured with resin or mechanical anchors, or welded to existing steelwork where that gives the better fixing.
  4. Allow cure time: resin anchors need time to cure before a trailer is reversed on to them, and the engineer will confirm when the bay can reopen.

We ask you to provide a clear bay, safe access to the yard, a named contact on the day and details of any permit-to-work or site induction. If the dock face needs concrete repair first, that is identified at survey and priced in the quote rather than discovered on the day.

Guide price, March
£120–£480 per bumper, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Working hours, shift patterns and windows for out-of-hours work
  • Wheel guide positions and yard markings for reversing vehicles
  • Traffic routes for vehicles and separation of pedestrians
  • Control positions, isolators and any existing interlocks
  • Age and condition of the equipment already in place
  • Access for deliveries, cranes or lifting equipment during installation

Options to discuss

Laminated rubber bumpers

Layers of fabric-reinforced rubber clamped between steel angles. Economical and good at absorbing impact, they are the standard choice for many general-purpose loading docks.

Replacement faces and fixings

New face plates, rubber inserts and anchors for existing bumpers where the body and backing are still sound, keeping replacement costs down on worn bays.

Which rules apply in England?

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in March. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about dock bumpers in March

Is the site survey in March free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in March, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

What details do you need from us to quote for dock bumpers?

To get started, send the site address in March, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

How many dock bumpers does a loading bay need?

Most loading bays need two dock bumpers, one fixed either side of the leveller. Docks receiving a wide mix of vehicles sometimes need taller bumpers or an extra lower pair so every vehicle meets rubber before it meets the wall. We confirm the number and layout at survey.

Can you replace just the face of a dock bumper?

Yes, on bumpers designed with replaceable faces. Steel-faced and some moulded designs let the worn face plate or rubber insert be changed while the backing stays bolted to the dock. Older laminated bumpers usually have to be replaced as a complete unit, which is still a modest cost compared with repairing impact damage to a leveller.

Dock bumpers near March

Other towns within reach of March on our coverage list include Wisbech (8 miles), Ely (13 miles) and Peterborough (14 miles), all covered on the same terms.

Other loading bay services in March

Full guide to dock bumpers · Everything we do in March

Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in March.

Call freeGet a quote