- Location
- Chippenham, Wiltshire
- Main postcode district
- SN15
- Nearby (straight line)
- Calne (5 miles), Melksham (6 miles) and Devizes (9 miles)
- Survey and quote
- Free, with a fixed written quote
A complete loading bay installation is the supply and fitting of every item a dock needs as one coordinated package: typically an insulated door, a dock leveller, a shelter or seal, bumpers, wheel guides, a dock light and traffic lights or interlocks. One party manages the design, sequence and commissioning, so the parts fit together and work as a single system.
Is this right for your site in Chippenham?
Third-party logistics providers in Chippenham taking on a new contract may need bays reconfigured quickly, and one coordinated package keeps the programme manageable. Ageing bays in Chippenham where the door, leveller and shelter are all worn can be replaced together, avoiding three separate disruptions to the same dock.
Developers building new distribution sheds in Chippenham can hand the whole dock package to one specialist, reducing the risk of gaps between the door, leveller and shelter trades.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Chippenham site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
Why buy the door, leveller and shelter as one package?
Buying the door, leveller and shelter as one package gives a single point of responsibility for how the bay works as a whole. When three suppliers each fit their own item, the gaps between them are nobody's job.
Typical problems a package avoids:
- a shelter head curtain that does not line up with the door header;
- a leveller width that does not suit the door opening or the trailers;
- bumper projection that leaves the dock seal too loose or crushed flat;
- door and leveller controls that cannot be interlocked because they were never designed to talk to each other;
- several handover packs and service schedules for one bay.
A package also makes multi-bay sites consistent. Every bay works the same way, staff learn one routine, and planned maintenance can cover the whole dock in one visit. For new warehouses it gives the main contractor one specialist to coordinate with instead of several.
What happens on site during a complete bay installation?
On a new build, a complete bay is installed to the main contractor's programme once the pits, openings and supplies are ready. In an operating warehouse, bays are replaced one at a time so the rest of the dock keeps working.
- Isolation: each bay is closed to trailers and its old equipment isolated and removed.
- Security: the opening is kept secure, either by fitting the new door early or with temporary hoarding.
- Lifting and deliveries: levellers and door sections need a clear delivery area and safe lifting.
- Commissioning: the door, leveller, shelter and controls are tested together, including any interlocks.
We ask you to provide access and a delivery area, power and welfare arrangements on construction sites, permit-to-work and induction details, and an agreed order for releasing bays. At handover you receive commissioning and test records, operating instructions and maintenance requirements. Equipment comes with the manufacturer's warranty, and workmanship terms are set out in writing in the quote.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Working hours, shift patterns and windows for out-of-hours work
- Drainage on recessed or sloping dock approaches
- Yard gradient and the slope of the approach to the dock
- How drivers are prevented from pulling away too early
- Condition of any existing leveller pit, kerb angles and pit drainage
- Whether planning, building control or a building warrant may be needed
Options to discuss
Safety pack add-on
Vehicle restraint, inside and outside traffic lights and interlocks between door, leveller and restraint, added to any bay specification as part of the same package.
Standard ambient bay
Insulated sectional door, hydraulic swing-lip leveller, retractable shelter, bumpers, wheel guides and a dock light. Suits general distribution and manufacturing docks handling mixed trailer types.
Regulations and approvals in England
Lift tables and dock lifts in Chippenham may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.
Questions about complete loading bay installations in Chippenham
Can you work outside our normal operating hours in Chippenham?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is the site survey in Chippenham free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
How long does installation take at a site in Chippenham?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Can you replace a whole bay in an operating warehouse?
Yes. In a live building we replace one bay at a time, keeping the opening secure and the neighbouring bays working. The order and timing of each bay are agreed with you so the dock keeps enough capacity throughout the works.
Do all bays on a site need the same equipment?
No. Many sites keep most bays on a standard specification and fit one or two bays differently, for example with a telescopic lip for end-loading or a lift table for vans. Keeping a common door, control and shelter type where possible makes training and servicing simpler.
Complete loading bay installation near Chippenham
If your site is not in Chippenham itself, it may be near one of these: Calne (5 miles), Melksham (6 miles) and Devizes (9 miles). Pick the closest.
Other loading bay services in Chippenham
Full guide to complete loading bay installations · Everything we do in Chippenham
For a written price on loading bay work in Chippenham, request a quote and include photos of the bay if you can.