- Location
- Andover, Hampshire
- Main postcode district
- SP10
- Nearby (straight line)
- Winchester (13 miles), Newbury (15 miles) and Salisbury (16 miles)
- Survey and quote
- Free, with a fixed written quote
A complete loading bay installation is the supply and fitting of every item a dock needs as one coordinated package: typically an insulated door, a dock leveller, a shelter or seal, bumpers, wheel guides, a dock light and traffic lights or interlocks. One party manages the design, sequence and commissioning, so the parts fit together and work as a single system.
Where does this fit at a dock in Andover?
Warehouses near Andover handling mixed trailer types can specify different levellers bay by bay within one package while keeping a common control and maintenance standard. Cold chain operators near Andover benefit from specifying the insulated door, shelter and leveller as one package so the thermal details match at every bay.
Main contractors working on warehouse schemes around Andover need pit drawings and embed details early, which a complete bay package provides at design stage.
Before anything is ordered, we visit your site in Andover for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
How do you choose the right equipment for each bay?
The right equipment for each bay comes from three questions: what vehicles arrive, what goods move through the door, and how many trailers the bay handles each day. The answers drive each choice:
- Vehicles: trailer bed heights commonly range from about 900 to 1,600 mm, which sets leveller length. Trailers that cannot reverse tight to the dock, or need end-loading, suit a telescopic lip.
- Goods: chilled and frozen goods need a well-insulated door and a tight seal or inflatable shelter; ambient goods usually suit a retractable shelter.
- Traffic: very busy bays may justify faster doors and heavier-duty levellers, plus restraints and interlocks.
- Building: a pit leveller, an edge-of-dock leveller or a loading house, depending on floor height and space.
Not every bay on a site needs the same kit. One bay with a lift table or a telescopic lip can handle the awkward vehicles. Our guide to specifying the dock package for a new warehouse walks through the decisions.
Why buy the door, leveller and shelter as one package?
Buying the door, leveller and shelter as one package gives a single point of responsibility for how the bay works as a whole. When three suppliers each fit their own item, the gaps between them are nobody's job.
Typical problems a package avoids:
- a shelter head curtain that does not line up with the door header;
- a leveller width that does not suit the door opening or the trailers;
- bumper projection that leaves the dock seal too loose or crushed flat;
- door and leveller controls that cannot be interlocked because they were never designed to talk to each other;
- several handover packs and service schedules for one bay.
A package also makes multi-bay sites consistent. Every bay works the same way, staff learn one routine, and planned maintenance can cover the whole dock in one visit. For new warehouses it gives the main contractor one specialist to coordinate with instead of several.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Forklift and pallet truck loads crossing the leveller platform
- Clear opening width and height for each door
- Condition of any existing leveller pit, kerb angles and pit drainage
- Headroom above the opening and which track type will suit it
- Wheel guide positions and yard markings for reversing vehicles
- Asbestos register and any other site hazard information
Options to discuss
Standard ambient bay
Insulated sectional door, hydraulic swing-lip leveller, retractable shelter, bumpers, wheel guides and a dock light. Suits general distribution and manufacturing docks handling mixed trailer types.
Safety pack add-on
Vehicle restraint, inside and outside traffic lights and interlocks between door, leveller and restraint, added to any bay specification as part of the same package.
Planning, building control and safety law in England
In England, Approved Document L (2021) sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work. That shapes door specification for sites in Andover, so we confirm the requirement for your project and check what applies at survey before recommending a door.
Questions about complete loading bay installations in Andover
Do you cover Andover for complete loading bay installations?
Yes. We take on complete loading bay installations for businesses in Andover and across Hampshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
How do you price complete loading bay installations for a site in Andover?
Guide budgets for supply and fit are £13,500 to £26,000 per bay, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Can you work alongside our main contractor on a new build in Andover?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Who forms the leveller pit?
The leveller pit is usually formed by the groundworker or main contractor to our drawings. Where there is no groundworker on site, we can arrange the pit works as part of the project, priced separately after survey. Either way, the pit details come from the leveller chosen for the bay.
Do you work with main contractors on new builds?
Yes. On new warehouses we work as the specialist dock package contractor to the main contractor's programme. We provide pit, dock face and electrical details early so the groundworks and building envelope are built to suit the equipment, then install and commission each bay.
Complete loading bay installation near Andover
If your site is not in Andover itself, it may be near one of these: Winchester (13 miles), Newbury (15 miles) and Salisbury (16 miles). Pick the closest.
Other loading bay services in Andover
Full guide to complete loading bay installations · Everything we do in Andover
Ready to talk about a loading bay in Andover? Call us, or send the details through the quote form.