- Location
- Wellington, Shropshire
- Main postcode district
- TF1
- Nearby (straight line)
- Telford (3 miles), Shrewsbury (10 miles) and Stafford (18 miles)
- Survey and quote
- Free, with a fixed written quote
A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.
Is this right for your site in Wellington?
For a packhouse in Wellington handling fresh produce, a well-sealed chilled dock door helps keep warm air out of the store once produce has been cooled. A chilled distribution centre in Wellington opens its dock doors many times a shift, so the door specification matters far more than at an ambient bay.
Pharmaceutical and healthcare stores around Wellington with tight temperature ranges can pair an insulated dock door with interlocks so the opening stays closed until a trailer is sealed.
Your loading bay stays our responsibility from the survey to the handover. In Wellington, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
How can a cold store door be replaced without losing temperature?
A cold store door can be replaced with very little temperature loss if the work is planned around the store, with the opening screened and the fitting done in one continuous visit.
On a live cold store we usually:
- schedule the work for the quietest period, often overnight or at a weekend,
- fit a temporary insulated screen or strip curtain while the opening is exposed,
- remove ice from the old frame and threshold before fixing the new door,
- pre-assemble as much as possible so the opening is exposed for the shortest time.
From your side we need product moved back from the opening, any site permits for working in cold areas, and power for the operator and frame heaters. Heated frames typically need their own supply, which we set out in the quote. Our cold store loading bays guide covers planning the work in more depth.
How much does a cold store dock door cost?
A cold store dock door typically costs £4,800 to £9,500 per door, excluding VAT, supply and fit. Chilled docks usually sit lower in that range than freezer docks, because freezer doors need more insulation and frame heating.
Price is mainly driven by:
- Operating temperature: chilled, frozen, or a door between two temperature zones.
- Door type: insulated sectional, insulated high-speed, or both at one opening.
- Heating: heated frames, heated bottom seals or threshold heating to stop ice forming.
- Panel thickness and thermal breaks: thicker panels and better breaks reduce condensation and heat gain.
- Controls: faster operators, interlocks with shelters and levellers, and automatic closing.
- Working conditions: installing in a live cold store often means out-of-hours work and temporary screening.
We price each door after a free site survey, and the written quote fixes the cost.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Power supply at each bay, including three-phase availability
- How drivers are prevented from pulling away too early
- Control positions, isolators and any existing interlocks
- Dock height and the mix of trailers you load
- Drainage on recessed or sloping dock approaches
- Access for deliveries, cranes or lifting equipment during installation
Options to discuss
Dock interlocks
Controls that link the door to the shelter, leveller and restraint so the door only opens when a trailer is docked and sealed against the building.
Heated frames and seals
Low-power heating in the side frames, bottom seal or threshold that keeps contact surfaces above freezing so the door does not ice up or tear its seals.
Regulations and approvals in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Wellington. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about cold store dock doors in Wellington
Will you deal with building control and planning for a project in Wellington?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
Is VAT included in your guide prices for cold store dock doors?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Shropshire as everywhere else: for cold store dock doors, it is £4,800 to £9,500 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
How long does installation take at a site in Wellington?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Can a standard sectional door be used on a chilled dock?
A standard insulated sectional door can work on a chilled dock if its panels are thick enough and its seals are in good condition. For frozen docks it is not usually suitable, because it lacks the thermal breaks and frame heating needed to stop ice forming. We advise on the right specification after surveying the store.
Will a new door reduce our refrigeration load?
A better-sealed, better-insulated door that stays shut except when a trailer is docked reduces the warm air entering the store, which is a significant source of load at a cold store dock. We cannot promise a figure, because results depend on your store, traffic and the rest of the dock, but the mechanism is well understood.
Cold store dock doors near Wellington
Looking beyond Wellington? Our pages for Telford (3 miles), Shrewsbury (10 miles) and Stafford (18 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Wellington
Full guide to cold store dock doors · Everything we do in Wellington
If a loading bay in Wellington needs attention, call us or send photos and details online.