- Location
- Mangotsfield, Gloucestershire
- Main postcode district
- BS16
- Nearby (straight line)
- Kingswood (2 miles), Bristol (5 miles) and Keynsham (5 miles)
- Survey and quote
- Free, with a fixed written quote
A cold store dock door is an insulated loading bay door built for chilled or frozen buildings, usually a sectional door with thick insulated panels or a high-speed door with an insulated curtain. It differs from a standard dock door in its thermal breaks, extra seals and, on freezer docks, heating in the frame or seals so that ice cannot lock the door shut or tear the seals.
Is this right for your site in Mangotsfield?
For a packhouse in Mangotsfield handling fresh produce, a well-sealed chilled dock door helps keep warm air out of the store once produce has been cooled. Food manufacturers in Mangotsfield moving finished product into frozen storage need doors that resist ice and close quickly behind each forklift or trailer movement.
Any cold store dock survey in Mangotsfield is carried out with the store running, so we can see ice, seals and traffic as they really are.
If you are planning cold store dock doors for a site in Mangotsfield, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
How much does a cold store dock door cost?
A cold store dock door typically costs £4,800 to £9,500 per door, excluding VAT, supply and fit. Chilled docks usually sit lower in that range than freezer docks, because freezer doors need more insulation and frame heating.
Price is mainly driven by:
- Operating temperature: chilled, frozen, or a door between two temperature zones.
- Door type: insulated sectional, insulated high-speed, or both at one opening.
- Heating: heated frames, heated bottom seals or threshold heating to stop ice forming.
- Panel thickness and thermal breaks: thicker panels and better breaks reduce condensation and heat gain.
- Controls: faster operators, interlocks with shelters and levellers, and automatic closing.
- Working conditions: installing in a live cold store often means out-of-hours work and temporary screening.
We price each door after a free site survey, and the written quote fixes the cost.
How does a cold store door work with the shelter and leveller?
On a cold store dock the door, shelter and leveller should work as one system, with the door opening only once the trailer is sealed against the building and closing before the seal is released.
A typical sequence is:
- The trailer reverses onto the bumpers and is held by a restraint, or the driver's keys are taken.
- The shelter inflates or the seal compresses around the trailer.
- The door opens and the leveller lip is lowered onto the trailer bed.
- Loading takes place inside a sealed link between store and trailer.
- The leveller is stored, the door closes, then the shelter releases.
Interlocks make this sequence automatic, so the door cannot be left open with no trailer present. Insulated leveller platforms and seals around the pit also reduce cold loss through the floor of the bay.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Temperature requirements for chilled, frozen or ambient goods
- Wheel guide positions and yard markings for reversing vehicles
- Wind exposure at the dock, which affects door and shelter choice
- How often each door cycles during a typical shift
- Gaps around trailers where heated or chilled air escapes
- Scope to convert ground-level doors into docks or add lift tables
Options to discuss
Heated frames and seals
Low-power heating in the side frames, bottom seal or threshold that keeps contact surfaces above freezing so the door does not ice up or tear its seals.
Insulated sectional cold store door
Thick insulated panels with thermal breaks and full perimeter seals, the usual choice for chilled and frozen external dock openings that also need to be secure overnight.
Regulations and approvals in England
Sites in Mangotsfield fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about cold store dock doors in Mangotsfield
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Mangotsfield, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work alongside our main contractor on a new build in Mangotsfield?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Mangotsfield site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Do heated door frames use a lot of power?
Frame and seal heaters are low-power elements designed to keep surfaces just above freezing rather than to heat the dock. Many can be controlled by a thermostat so they only run when needed. We set out the supply required in the written quote so it can be planned before installation.
Can a standard sectional door be used on a chilled dock?
A standard insulated sectional door can work on a chilled dock if its panels are thick enough and its seals are in good condition. For frozen docks it is not usually suitable, because it lacks the thermal breaks and frame heating needed to stop ice forming. We advise on the right specification after surveying the store.
Cold store dock doors near Mangotsfield
Sites close to Mangotsfield get the same service, including those in Kingswood (2 miles), Bristol (5 miles) and Keynsham (5 miles), with every job run the same way.
Other loading bay services in Mangotsfield
Full guide to cold store dock doors · Everything we do in Mangotsfield
Ready to talk about a loading bay in Mangotsfield? Call us, or send the details through the quote form.