Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock safety · Coalville

Vehicle restraints in Coalville

We offer help with vehicle restraints to businesses in Coalville and across Leicestershire, whether the bay handles a few deliveries a week or trailers around the clock.

Guide £4,200–£9,800 per bay ex VATFree site surveyLE67
Book a free survey0800 088 6248
Location
Coalville, Leicestershire
Main postcode district
LE67
Nearby (straight line)
Loughborough (8 miles), Castle Donington (8 miles) and Swadlincote (9 miles)
Survey and quote
Free, with a fixed written quote
Vehicle restraints, in short

A vehicle restraint is a device at a loading bay that physically holds a trailer against the dock until it is safe to leave. In the UK most systems act on the rear wheel, either as a powered wheel-based restraint or a sensor wheel chock. Restraints guard against early drive-away and trailer creep, and are usually interlocked with the door and dock traffic lights.

Why do sites in Coalville choose this?

Multi-tenant logistics parks around Coalville can benefit from restraints when several tenants share yard space and trailers from different fleets arrive throughout the day. New-build distribution sheds in Coalville can have restraint rails and ducting planned into the yard slab from the start, which is simpler than cutting them in later.

Third-party hauliers visiting sites in Coalville may not know each site's procedures, so a restraint that holds the wheel removes reliance on every driver following instructions.

It starts with a free site survey in Coalville, where we measure the openings, check the dock and talk through how the bay is used. You then receive a fixed written quote. Once you accept, we manage the job: specialist installation engineers carry out the work under our management, planned around your deliveries, and out-of-hours working can be arranged. At handover we test everything with you and leave the documentation.

Wheel-based or hook restraint: which suits UK trailers?

Wheel-based restraints and sensor wheel chocks suit most UK trailers, because they act on the rear wheel rather than on the back of the vehicle. Hook restraints, which catch the rear impact guard (sometimes called an ICC bar), are common elsewhere but suit fewer UK fleets.

  • Wheel-based restraint: a steel guide rail fixed to the yard, with an arm or chock that moves against the rear wheel, either powered or pushed into place by the operative. It works regardless of tail lifts or underrun guard design.
  • Sensor wheel chock: a heavy chock placed in front of the wheel, with a sensor or parking station that tells the dock controls it is in position. Lower cost and minimal groundwork, but it relies on someone placing it each time.
  • Hook restraint: mounted on the dock face and hooking the rear guard. UK and European trailers vary widely at the rear, and tail lifts often get in the way, so this type needs checking against your actual fleet.

How does a vehicle restraint work with dock lights and interlocks?

A vehicle restraint is normally linked to the dock traffic lights and the door controls, so engaging the restraint is what allows loading to start.

A typical sequence looks like this:

  1. The trailer reverses on to the bay with the outside light on green and the door closed.
  2. The restraint engages the rear wheel. The outside light turns red for the driver and the inside light turns green for dock staff.
  3. The door can now be opened, and the leveller can only operate once the door is fully open.
  4. When loading is finished, the leveller is parked and the door closed before the restraint can release.
  5. The restraint releases, the outside light turns green and the driver can leave.

The exact interlocks depend on your equipment and risk assessment. See dock traffic lights and interlocks for the options on signals and control logic.

Guide price, Coalville
£4,200–£9,800 per bay, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

  • Scope to convert ground-level doors into docks or add lift tables
  • Lighting inside trailers and at the dock face
  • Dock height and the mix of trailers you load
  • Wheel guide positions and yard markings for reversing vehicles
  • Gaps around trailers where heated or chilled air escapes
  • Condition of any existing leveller pit, kerb angles and pit drainage

Options to discuss

Sensor wheel chock

A heavy-duty chock with a sensor or parking station that tells the dock controls when it is in place. Minimal groundwork and suited to retrofit on existing bays.

Automatic wheel-based restraint

A powered arm on a yard-mounted rail that locates against the rear wheel at the push of a button and signals the dock controls once the trailer is held.

What do the rules in England mean for the work?

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Coalville. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about vehicle restraints in Coalville

What details do you need from us to quote for vehicle restraints?

To get started, send the site address in Coalville, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Will you deal with building control and planning for a project in Coalville?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Coalville, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Do vehicle restraints need servicing?

Yes. A restraint is work equipment under PUWER, so it must be maintained in a safe condition and inspected where wear could lead to danger. Servicing typically covers the rail and arm, sensors, controls and the interlock sequence with the door and lights.

What happens if a powered restraint loses power?

Powered restraints are normally designed with a manual release so a trailer is not trapped on the bay if power is lost. Your site procedure should say who is allowed to use the release and what checks they make first. We explain the release method at handover.

Vehicle restraints near Coalville

Looking beyond Coalville? Our pages for Loughborough (8 miles), Castle Donington (8 miles) and Swadlincote (9 miles) describe the same loading bay services and how to get in touch.

Other loading bay services in Coalville

Full guide to vehicle restraints · Everything we do in Coalville

Call us or request a quote online to talk through loading bay work at your site in Coalville.

Call freeGet a quote