Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Dock levellers · Haverhill

Telescopic-lip dock levellers in Haverhill

Need telescopic-lip dock levellers for a warehouse, factory or distribution site in Haverhill? Below you will find how we approach the work, what we check on site and the details that help us give you an accurate answer.

Guide £6,800–£11,800 per leveller ex VATFree site surveyCB9
Location
Haverhill, Suffolk
Main postcode district
CB9
Nearby (straight line)
Newmarket (11 miles), Sudbury (13 miles) and Braintree (15 miles)
Survey and quote
Free, with a fixed written quote
Telescopic-lip dock levellers, in short

A telescopic-lip dock leveller is a hydraulic pit leveller whose front lip slides forward out of the platform, rather than swinging on a hinge, and can be extended by a controlled amount onto the trailer bed. Telescopic lips commonly extend 500 to 1,000 mm, which lets operators reach over tail lifts, place the lip between pallets and load the last row in a trailer.

Is this right for your site in Haverhill?

Parcel and courier hubs in Haverhill with varied vehicle types can use the longer lip reach to serve more of their fleet from fewer bays. A container-handling operation in Haverhill can benefit from a telescopic lip, as container floors and chassis heights vary more than standard trailers.

Manufacturing sites in Haverhill that end-load finished goods can place the lip precisely between pallets to reach the rear row.

We keep the process simple for sites in Haverhill. A free survey tells us what the dock needs; a fixed written quote tells you what it will cost and what is included. We then organise the installation, with specialist engineers under our management and a programme agreed around your shifts. Night and weekend work is available by arrangement. Before we leave, the new equipment is tested, demonstrated and handed over with its documentation.

How are drive-away risks managed while the lip rests on a trailer?

Drive-away risks are managed by stopping the vehicle leaving until loading has finished and the lip has been withdrawn, using traffic lights, vehicle or trailer restraints, or the person in charge keeping the keys or paperwork. HSE workplace transport guidance (HSG136) and the HSE loading factsheet (followed by HSENI in Northern Ireland) call for safeguards against drivers driving away too early.

  • Why it matters: a lip resting on the bed is only safe while the trailer stays put, and trailer creep during forklift loading can open a gap at the dock edge.
  • Equipment duties: the leveller is work equipment under PUWER 1998 in Great Britain or PUWER (Northern Ireland) 1999, so it must be maintained and inspected where deterioration could lead to danger. Engineering insurers commonly inspect at 12-month intervals.
  • Standard: BS EN 1398:2009 sets the safety requirements for dock levellers and is current, under review.

Enforcement is by HSE in Great Britain and HSENI in Northern Ireland. Our guide to preventing drive-away and trailer creep compares the safeguards.

Why does a telescopic-lip leveller cost more than a swing-lip unit?

A telescopic-lip dock leveller typically costs £6,800 to £11,800 per leveller, excluding VAT, supply and fit, assuming an existing, sound pit. It costs more than a swing-lip unit because the lip slides in its own guides inside the platform, which means more steel, a longer lip and more involved hydraulics and controls.

Within the range, the price depends on:

  • Lip extension: a longer reach needs a longer lip and stronger guides.
  • Platform length and width: longer platforms give gentler gradients across mixed trailer heights.
  • Capacity: higher ratings for heavy loads or large forklifts.
  • Insulation: insulated platforms and pit seals for chilled and frozen docks.
  • Controls: automatic return, interlocks and links to restraints and traffic lights.

New pits, pit repairs and groundworks are priced separately after survey, and the written quote is the fixed price. We often quote both lip types side by side, so you can see whether the extra flexibility justifies the cost on each bay.

Guide price, Haverhill
£6,800–£11,800 per leveller, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

  • Drainage on recessed or sloping dock approaches
  • Yard gradient and the slope of the approach to the dock
  • Access for deliveries, cranes or lifting equipment during installation
  • Traffic routes for vehicles and separation of pedestrians
  • How drivers are prevented from pulling away too early
  • Asbestos register and any other site hazard information

Options to discuss

Insulated cold store version

An insulated platform with perimeter seals for chilled and frozen docks, often paired with an inflatable shelter and an insulated dock door.

500 mm lip extension

A commonly specified reach for precise placement and end loading on standard trailers and refrigerated vehicles that do not have tail lifts.

Regulations and approvals in England

Workplace safety in England is regulated by HSE. For a loading bay in Haverhill, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about telescopic-lip dock levellers in Haverhill

How do you price telescopic-lip dock levellers for a site in Haverhill?

Guide budgets for supply and fit are £6,800 to £11,800 per leveller, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.

Do you remove and dispose of the old equipment?

Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Haverhill, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.

Do you cover Haverhill for telescopic-lip dock levellers?

Yes. We take on telescopic-lip dock levellers for businesses in Haverhill and across Suffolk. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Are telescopic levellers suitable for cold stores?

Yes, telescopic levellers are widely used in cold stores because refrigerated trailers are often loaded right to the rear doors. Insulated platforms and perimeter seals reduce cold loss through the pit, and the leveller is usually interlocked with the door and shelter.

Can telescopic and swing-lip levellers be mixed on one dock?

Yes, and many sites do. Fitting telescopic levellers on the bays that receive tail-lift vehicles or need end loading, and swing-lip units on the rest, keeps costs down while covering every vehicle type. Clear bay signage helps drivers reverse onto the right one.

Telescopic-lip dock levellers near Haverhill

Businesses outside Haverhill may find their nearest town in this list: Newmarket (11 miles), Sudbury (13 miles) and Braintree (15 miles). Each page covers doors, docks, repairs and servicing.

Other loading bay services in Haverhill

Full guide to telescopic-lip dock levellers · Everything we do in Haverhill

If a loading bay in Haverhill needs attention, call us or send photos and details online.

Call freeGet a quote