Swing-lip dock levellers in Adwick le Street

Location

Adwick le Street, South Yorkshire

Main postcode district

DN6

Nearby (straight line)

Bentley (3 miles), Doncaster (4 miles) and South Elmsall (4 miles)

Survey and quote

Free, with a fixed written quote

Why do sites in Adwick le Street choose this?

Mixed bays at a site in Adwick le Street, where some trailers have tail lifts and others do not, may suit a combination of swing-lip and telescopic levellers. Ageing levellers in older docks around Adwick le Street can often be replaced like for like in the existing pit, avoiding new concrete work if the pit is sound.

Every leveller recommendation we make for a dock in Adwick le Street follows a measured survey of the pit, dock height and the trailers you actually receive.

A single contact at Loading Bay Doors handles your project in Adwick le Street from start to finish. The free site survey and fixed written quote come first, with no obligation to proceed. We then book the installation for times that suit the operation, including out of hours by arrangement, and manage the specialist engineers on site. At the end we commission and test the equipment, walk your team through it and provide the documentation.

What happens when a swing-lip leveller is fitted into an existing pit?

Fitting a swing-lip leveller into an existing pit normally takes one to two working days per bay, with the bay closed throughout. The work runs in a set order:

1. The old leveller is isolated, lifted out and removed from site.
2. The pit is cleaned and measured, and the edge steel checked for damage.
3. The new leveller is lowered in, set level, and welded or anchored to the pit steel.
4. The hydraulic power pack and control panel are connected, and any interlocks wired.
5. Toe guards, lip and bumpers are checked, then the leveller is run through its full range.

From your side we need the bay emptied and taken out of service, clear access for lifting equipment inside or outside the building, and a suitable power supply, which for most hydraulic levellers is three-phase. If the pit needs repairs, these are done first and can add time, which we confirm in the quote.

Which trailers and loads suit a swing-lip leveller?

A swing-lip leveller suits everyday loading of standard trailers, where pallets sit a little way back from the rear of the trailer and the lip has room to land on the bed. It is a common choice for general distribution.

• Good fit: curtain-siders and box trailers loaded by forklift or pallet truck, with the lip landing behind the first row of pallets.
• Less suited: trailers loaded right up to the rear doors, because the lip needs clear bed space to rest on.
• Tail-lift vehicles: a folded tail lift can stop the lip reaching the bed.
• End loading: loading the last row of pallets at the very rear is awkward with a fixed-length lip.

Where these situations are common, a telescopic-lip dock leveller places its lip exactly where it is needed. Many sites fit both types across their bays, matching each bay to the vehicles it receives.

What do we check at the survey?

• Gaps around trailers where heated or chilled air escapes
• Whether planning, building control or a building warrant may be needed
• Wheel guide positions and yard markings for reversing vehicles
• Wind exposure at the dock, which affects door and shelter choice
• Scope to convert ground-level doors into docks or add lift tables
• Asbestos register and any other site hazard information

Options to discuss

Which rules apply in England?

Lift tables and dock lifts in Adwick le Street may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies at survey.

Questions about swing-lip dock levellers in Adwick le Street

Swing-lip dock levellers near Adwick le Street

The same survey, quote and repair service is available in towns around Adwick le Street, such as Bentley (3 miles), Doncaster (4 miles) and South Elmsall (4 miles).

• Bentley
• Doncaster
• South Elmsall
• Conisbrough
• Mexborough
• All of South Yorkshire

Other loading bay services in Adwick le Street

• Complete loading bay installationDoor, leveller, shelter and safety kit supplied and fitted as one package.
• Loading bay conversions and upgradesTurn ground-level doors into docks or bring old bays up to date.
• Dock bumpersRubber and steel-faced buffers that protect the dock face and leveller.
• Dock traffic lights and interlocksRed and green signals and control interlocks for safe dock sequencing.
• PVC strip curtainsOverlapping PVC strips that cut draughts at busy openings.
• Roller shutter loading bay doorsSteel or aluminium roller shutters for docks and goods-in openings.

Full guide to swing-lip dock levellers · Everything we do in Adwick le Street

Send a few photos of the dock and a short description of the problem, and we will come back to you about your Adwick le Street site.