Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Lifts and loading houses · Washwood Heath

Scissor lift tables in Washwood Heath

For operators in Washwood Heath thinking about scissor lift tables, the starting point is a conversation about the site, the vehicles you load and how the bay is used day to day.

Guide £9,500–£28,000 per lift ex VATFree site surveyB8, B9
Book a free survey0800 088 6248
Location
Washwood Heath, West Midlands
Main postcode districts
B8 and B9
Nearby (straight line)
Aston (2 miles), Birmingham (3 miles) and Sutton Coldfield (5 miles)
Survey and quote
Free, with a fixed written quote
Scissor lift tables, in short

A scissor lift table, often called a dock lift, is a powered platform raised and lowered by a hydraulic scissor mechanism to move goods between two levels. At a loading bay it lifts pallets and pallet trucks from ground level to the height of a trailer bed, making it a practical alternative to a raised dock where forming one is not possible.

Where does this fit at a dock in Washwood Heath?

Where ground conditions in Washwood Heath make a deep recessed dock costly, a pit-mounted or surface-mounted lift table can be the more practical option. Each lift table enquiry from Washwood Heath is surveyed and quoted in the same way as any other UK site, with groundworks for a pit priced separately.

Sites in Washwood Heath replacing an ageing dock lift should look at its LOLER examination history, as repeated defects can signal that replacement is due.

Any project involving scissor lift tables at a working site in Washwood Heath takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.

How much does a scissor lift table cost?

A scissor lift table for a loading bay typically costs £9,500 to £28,000 per lift, supplied and installed, excluding VAT. Smaller surface-mounted lifts sit towards the lower end; large, high-capacity pit lifts with gates and bridge plates sit towards the top.

What moves the price:

  • Capacity: dock lifts are typically rated somewhere between 2,000 and 6,000 kg, and heavier ratings need a stronger mechanism.
  • Platform size and travel: larger platforms and greater lift heights cost more.
  • Mounting: pit-mounted or surface-mounted with a ramp.
  • Safety equipment: bellows or skirts, toe guards, rails, gates and bridge plates.
  • Electrics and access: supply to the power pack, delivery access and out-of-hours working.

Forming a pit, drainage and other groundworks are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.

What happens on site when a dock lift is installed?

Installing a dock lift takes the doorway out of use while any pit is formed and the lift fitted, so an alternative loading point should be planned for that period.

  1. Pit works: where a pit is needed, the yard is broken out, the pit formed and drained, and the concrete left to cure.
  2. Delivery and positioning: the lift is offloaded and set in place by forklift or crane, then levelled and fixed.
  3. Power and controls: the power pack and control station are connected to the supply confirmed at survey.
  4. Testing: the lift is run through its full travel, safety devices are checked and it is tested under load.
  5. Handover: operators are shown how to use it, and the documents and examination regime are explained.

We ask you to provide a delivery route, a cleared working area, the electrical supply, any drawings of buried services and a contact on site.

Guide price, Washwood Heath
£9,500–£28,000 per lift, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

  • Age and condition of the equipment already in place
  • Forklift and pallet truck loads crossing the leveller platform
  • Traffic routes for vehicles and separation of pedestrians
  • Headroom above the opening and which track type will suit it
  • Drainage on recessed or sloping dock approaches
  • Access for deliveries, cranes or lifting equipment during installation

Options to discuss

Safety bellows and skirts

A flexible enclosure around the scissor mechanism that keeps hands, feet and debris out of shear and crush points, and helps keep the mechanism clean.

Surface-mounted lift table

Stands on the existing floor with a short ramp on to the platform at its lowest height. No excavation, a quicker install and easier to relocate later.

Planning, building control and safety law in England

Workplace safety in England is regulated by HSE. For a loading bay in Washwood Heath, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about scissor lift tables in Washwood Heath

Can you work outside our normal operating hours in Washwood Heath?

Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.

Will you deal with building control and planning for a project in Washwood Heath?

We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.

Is the site survey in Washwood Heath free?

Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.

Does a scissor lift table need a pit?

No, a scissor lift table does not always need a pit. Surface-mounted lifts stand on the existing floor with a short ramp at the bottom. A pit lets the platform sit flush with the yard so pallet trucks roll straight on, which suits frequent or heavy loading. We recommend one or the other at survey.

Can a forklift drive on to a scissor lift table?

Only if the lift has been designed and rated for forklift traffic. Most loading bay lift tables are built for pallet trucks, and a forklift's weight and wheel loads need a much heavier platform and mechanism. Tell us how you load at survey so the lift is specified correctly.

Scissor lift tables near Washwood Heath

Businesses outside Washwood Heath may find their nearest town in this list: Aston (2 miles), Birmingham (3 miles) and Sutton Coldfield (5 miles). Each page covers doors, docks, repairs and servicing.

Other loading bay services in Washwood Heath

Full guide to scissor lift tables · Everything we do in Washwood Heath

Call us or request a quote online to talk through loading bay work at your site in Washwood Heath.

Call freeGet a quote