Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Lifts and loading houses · Worksop

Scissor lift tables in Worksop

When you need scissor lift tables in Worksop or anywhere else in Nottinghamshire, we organise the job end to end and keep disruption to your loading operation as low as we can.

Guide £9,500–£28,000 per lift ex VATFree site surveyS80
Book a free survey0800 088 6248
Location
Worksop, Nottinghamshire
Main postcode district
S80
Nearby (straight line)
Dinnington (5 miles), Retford (8 miles) and Maltby (9 miles)
Survey and quote
Free, with a fixed written quote
Scissor lift tables, in short

A scissor lift table, often called a dock lift, is a powered platform raised and lowered by a hydraulic scissor mechanism to move goods between two levels. At a loading bay it lifts pallets and pallet trucks from ground level to the height of a trailer bed, making it a practical alternative to a raised dock where forming one is not possible.

Where does this fit at a dock in Worksop?

Each lift table enquiry from Worksop is surveyed and quoted in the same way as any other UK site, with groundworks for a pit priced separately. Older industrial buildings in Worksop built with ground-level doors only can use a scissor lift table to load trailers without excavating the yard.

Food, drink and pharmaceutical sites around Worksop that need clean, controlled loading points may prefer a lift table with bellows enclosing the scissor mechanism.

Here is what happens after you contact us about a site in Worksop. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.

What happens on site when a dock lift is installed?

Installing a dock lift takes the doorway out of use while any pit is formed and the lift fitted, so an alternative loading point should be planned for that period.

  1. Pit works: where a pit is needed, the yard is broken out, the pit formed and drained, and the concrete left to cure.
  2. Delivery and positioning: the lift is offloaded and set in place by forklift or crane, then levelled and fixed.
  3. Power and controls: the power pack and control station are connected to the supply confirmed at survey.
  4. Testing: the lift is run through its full travel, safety devices are checked and it is tested under load.
  5. Handover: operators are shown how to use it, and the documents and examination regime are explained.

We ask you to provide a delivery route, a cleared working area, the electrical supply, any drawings of buried services and a contact on site.

How much does a scissor lift table cost?

A scissor lift table for a loading bay typically costs £9,500 to £28,000 per lift, supplied and installed, excluding VAT. Smaller surface-mounted lifts sit towards the lower end; large, high-capacity pit lifts with gates and bridge plates sit towards the top.

What moves the price:

  • Capacity: dock lifts are typically rated somewhere between 2,000 and 6,000 kg, and heavier ratings need a stronger mechanism.
  • Platform size and travel: larger platforms and greater lift heights cost more.
  • Mounting: pit-mounted or surface-mounted with a ramp.
  • Safety equipment: bellows or skirts, toe guards, rails, gates and bridge plates.
  • Electrics and access: supply to the power pack, delivery access and out-of-hours working.

Forming a pit, drainage and other groundworks are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.

Guide price, Worksop
£9,500–£28,000 per lift, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What do we check at the survey?

  • Access for deliveries, cranes or lifting equipment during installation
  • Wind exposure at the dock, which affects door and shelter choice
  • Gaps around trailers where heated or chilled air escapes
  • Dock height and the mix of trailers you load
  • Scope to convert ground-level doors into docks or add lift tables
  • Traffic routes for vehicles and separation of pedestrians

Options to discuss

Bridge plate

A hinged plate on the platform end that rests on the trailer bed during loading, bridging the gap so pallet trucks can cross smoothly between lift and trailer.

Surface-mounted lift table

Stands on the existing floor with a short ramp on to the platform at its lowest height. No excavation, a quicker install and easier to relocate later.

What do the rules in England mean for the work?

Workplace safety in England is regulated by HSE. For a loading bay in Worksop, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about scissor lift tables in Worksop

What details do you need from us to quote for scissor lift tables?

To get started, send the site address in Worksop, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Do you cover Worksop for scissor lift tables?

Yes. We take on scissor lift tables for businesses in Worksop and across Nottinghamshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Which building and safety rules apply to a site in Worksop?

It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Worksop, we check what applies at survey and design to it.

Can a scissor lift table be installed outdoors?

Yes, scissor lift tables are often installed outdoors at the loading door. Outdoor lifts need a drained pit or a suitable base, weather-resistant finishes and controls, and sometimes a canopy over the loading area. A canopy is an external structure that may need planning permission, which we check at survey.

What capacity of dock lift do I need?

A dock lift needs a capacity above the heaviest combined load it will carry, including the goods, the pallet truck and an operator if they ride on it. Loading bay lifts are typically rated somewhere between 2,000 and 6,000 kg. We work out the right rating from your loads at survey.

Scissor lift tables near Worksop

Businesses outside Worksop may find their nearest town in this list: Dinnington (5 miles), Retford (8 miles) and Maltby (9 miles). Each page covers doors, docks, repairs and servicing.

Other loading bay services in Worksop

Full guide to scissor lift tables · Everything we do in Worksop

Phone us to discuss your loading bay in Worksop, or start with the online quote tool if you prefer to send details first.

Call freeGet a quote