Scissor lift tables in Hounslow

Location: Hounslow, Greater London
Main postcode districts: TW3, TW4 and TW6
Nearby (straight line): Feltham (3 miles), Southall (3 miles) and Greenford (4 miles)
Survey and quote: Free, with a fixed written quote

Scissor lift tables, in short

A scissor lift table, often called a dock lift, is a powered platform raised and lowered by a hydraulic scissor mechanism to move goods between two levels. At a loading bay it lifts pallets and pallet trucks from ground level to the height of a trailer bed, making it a practical alternative to a raised dock where forming one is not possible.

Where does this fit at a dock in Hounslow?

Older industrial buildings in Hounslow built with ground-level doors only can use a scissor lift table to load trailers without excavating the yard. Each lift table enquiry from Hounslow is surveyed and quoted in the same way as any other UK site, with groundworks for a pit priced separately.

Food, drink and pharmaceutical sites around Hounslow that need clean, controlled loading points may prefer a lift table with bellows enclosing the scissor mechanism.

Any project involving scissor lift tables at a working site in Hounslow takes planning. We survey free of charge, quote a fixed price in writing, and then agree a programme that keeps as much of the dock running as possible. Specialist installation engineers carry out the work under our management, out of hours if that suits you better. On completion we test each item, show your team how it operates and leave the documentation with you.

How much does a scissor lift table cost?

A scissor lift table for a loading bay typically costs £9,500 to £28,000 per lift, supplied and installed, excluding VAT. Smaller surface-mounted lifts sit towards the lower end; large, high-capacity pit lifts with gates and bridge plates sit towards the top.

What moves the price:

Capacity: dock lifts are typically rated somewhere between 2,000 and 6,000 kg, and heavier ratings need a stronger mechanism.
Platform size and travel: larger platforms and greater lift heights cost more.
Mounting: pit-mounted or surface-mounted with a ramp.
Safety equipment: bellows or skirts, toe guards, rails, gates and bridge plates.
Electrics and access: supply to the power pack, delivery access and out-of-hours working.

Forming a pit, drainage and other groundworks are priced separately after survey. Following a free site survey, the written quote is the fixed price. VAT is added at the standard rate.

What safety features should a loading bay lift table have?

A loading bay lift table should protect people from the scissor mechanism, stop if anything is trapped under the platform, and stop people or loads falling from the edges. Lift tables are specified to BS EN 1570-1:2024, and common features include:

Toe guards: trip bars or sensitive edges around the platform underside that stop the lift descending on contact.
Safety bellows or skirts: a flexible enclosure that keeps hands, feet and debris out of shear and crush points.
Guard rails and gates: on open sides, sized to how people and pallet trucks move on and off.
Bridge plate: a hinged plate that rests on the trailer bed to bridge the gap.
Hold-to-run controls: the lift only moves while the button is held, with a stop button within reach.
Hydraulic protection: valves that stop the platform dropping if a hose fails.
Maintenance props: supports that hold the platform up safely during servicing.

Guide price, Hounslow

£9,500–£28,000 per lift, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

Survey checklist for your dock

Scope to convert ground-level doors into docks or add lift tables
Condition of any existing leveller pit, kerb angles and pit drainage
Gaps around trailers where heated or chilled air escapes
Access for deliveries, cranes or lifting equipment during installation
Forklift and pallet truck loads crossing the leveller platform
Asbestos register and any other site hazard information

Options to discuss

Pit-mounted dock lift

Set in a concrete pit so the platform lowers flush with the yard, letting pallet trucks drive straight on. The best choice for frequent, heavy loading at a fixed door.

Bridge plate

A hinged plate on the platform end that rests on the trailer bed during loading, bridging the gap so pallet trucks can cross smoothly between lift and trailer.

Planning, building control and safety law in England

Workplace safety in England is regulated by HSE. For a loading bay in Hounslow, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.

Questions about scissor lift tables in Hounslow

What warranty comes with new loading bay equipment?

New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Hounslow site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.

Do you cover Hounslow for scissor lift tables?

Yes. We take on scissor lift tables for businesses in Hounslow and across Greater London. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

Is VAT included in your guide prices for scissor lift tables?

No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Greater London as everywhere else: for scissor lift tables, it is £9,500 to £28,000 per lift, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.

Can a scissor lift table be installed outdoors?

Yes, scissor lift tables are often installed outdoors at the loading door. Outdoor lifts need a drained pit or a suitable base, weather-resistant finishes and controls, and sometimes a canopy over the loading area. A canopy is an external structure that may need planning permission, which we check at survey.

What capacity of dock lift do I need?

A dock lift needs a capacity above the heaviest combined load it will carry, including the goods, the pallet truck and an operator if they ride on it. Loading bay lifts are typically rated somewhere between 2,000 and 6,000 kg. We work out the right rating from your loads at survey.

Scissor lift tables near Hounslow

If your site is not in Hounslow itself, it may be near one of these: Feltham (3 miles), Southall (3 miles) and Greenford (4 miles). Pick the closest.

Other loading bay services in Hounslow

Full guide to scissor lift tables · Everything we do in Hounslow

Get in touch about loading bay doors and dock equipment in Hounslow: call, email or use the quote tool.