A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Is this right for your site in West Yorkshire?
Third-party logistics sites in West Yorkshire receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary. Shelter sizing for a bay in West Yorkshire starts with measuring the door and wall and recording the tallest, lowest and widest trailers you receive.
Loading staff at a draughty dock in West Yorkshire notice the difference when the gaps around the trailer are closed, especially through the colder months.
It starts with a free site survey in West Yorkshire, where we measure the openings, check the dock and talk through how the bay is used. You then receive a fixed written quote. Once you accept, we manage the job: specialist installation engineers carry out the work under our management, planned around your deliveries, and out-of-hours working can be arranged. At handover we test everything with you and leave the documentation.
Why do trailer door hinges matter when choosing a shelter?
Trailer door hinges matter because the rear doors are opened and folded back along the trailer sides before reversing, and the shelter has to accommodate them. If the shelter is too shallow, the hinges and doors sit outside it, leaving gaps or snagging the curtains.
A shelter handles this better than a seal:
- its side curtains drape over the opened doors and hinges rather than pressing against them,
- the full width of the trailer opening stays clear, because nothing protrudes in front of the trailer's rear frame,
- slit curtains wrap around hinge blocks without tearing.
By contrast, a dock seal presses against the rear of the trailer, so gaps at the hinges can remain, and poorly sized side pads can intrude into the opening. That is why shelters are generally favoured for mixed fleets, where hinge positions and trailer widths vary from one vehicle to the next.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
Towns we cover in West Yorkshire
Looking for retractable dock shelters in a specific part of West Yorkshire? Start with the nearest town on this list.
- Leeds
- Bradford
- Huddersfield
- Wakefield
- Halifax
- Dewsbury
- Morley
- Keighley
- Castleford
- Pontefract
- Batley
- Yeadon
- Brighouse
- Shipley
- Cleckheaton
- Pudsey
- Ossett
- Guiseley
- Liversedge
- Horsforth
- South Elmsall
- Normanton
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in West Yorkshire, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions
Can you work outside our normal operating hours in West Yorkshire?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is VAT included in your guide prices for retractable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in West Yorkshire as everywhere else: for retractable dock shelters, it is £1,900 to £4,400 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Can a shelter be fixed to a cladded wall?
Yes, but cladding on its own is not usually strong enough to carry a shelter. We fix through to the building's steel frame behind the cladding, or use a steel subframe or spreader plates to spread the load, and confirm the method after inspecting the wall.
Other services in West Yorkshire
Full guide to retractable dock shelters · All loading bay services in West Yorkshire