- Location
- Tyldesley, Greater Manchester
- Main postcode district
- M29
- Nearby (straight line)
- Leigh (2 miles), Walkden (3 miles) and Bolton (5 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
What matters for retractable dock shelters in Tyldesley?
Third-party logistics sites in Tyldesley receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary. Loading staff at a draughty dock in Tyldesley notice the difference when the gaps around the trailer are closed, especially through the colder months.
If a shelter on an older unit in Tyldesley has a sound frame but torn, faded curtains, replacing just the curtains can be the economical choice.
For retractable dock shelters in Tyldesley, we begin with a free site survey and a fixed written quote, so you know the scope and cost before committing. We take responsibility for managing the job, and specialist installation engineers carry it out under our supervision. Bays are taken out of use in a planned sequence so the rest of the dock keeps working, and evening or weekend work can be arranged. Each item is tested at handover and the documentation is left with you.
Why do trailer door hinges matter when choosing a shelter?
Trailer door hinges matter because the rear doors are opened and folded back along the trailer sides before reversing, and the shelter has to accommodate them. If the shelter is too shallow, the hinges and doors sit outside it, leaving gaps or snagging the curtains.
A shelter handles this better than a seal:
- its side curtains drape over the opened doors and hinges rather than pressing against them,
- the full width of the trailer opening stays clear, because nothing protrudes in front of the trailer's rear frame,
- slit curtains wrap around hinge blocks without tearing.
By contrast, a dock seal presses against the rear of the trailer, so gaps at the hinges can remain, and poorly sized side pads can intrude into the opening. That is why shelters are generally favoured for mixed fleets, where hinge positions and trailer widths vary from one vehicle to the next.
How much does a retractable dock shelter cost?
A retractable dock shelter typically costs £1,900 to £4,400 per shelter, excluding VAT, supply and fit. Most of the variation comes from size, projection and the curtain specification.
- Size: width and height, set by your door and the largest trailers you receive.
- Projection: deeper shelters cost more but leave room for opened trailer doors and the leveller lip.
- Curtains: heavier-grade fabrics, slit side curtains, adjustable top curtains and guide stripes.
- Frame: sprung, pantograph or rigid, in a galvanised or painted finish.
- Fixings: fixing to cladding usually needs a steel subframe or spreader plates.
- Access and removal: powered access equipment in the yard, and taking down an old shelter.
On an older shelter with a sound frame, new curtains may be all that is needed, and we will say so if that is the case. Every price is fixed in the written quote after a free site survey.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Age and condition of the equipment already in place
- Forklift and pallet truck loads crossing the leveller platform
- Traffic routes for vehicles and separation of pedestrians
- Wind exposure at the dock, which affects door and shelter choice
- Bumper position and wear or damage on the dock face
- Control positions, isolators and any existing interlocks
Options to discuss
Adjustable top curtain
A top curtain that can be lowered or raised to suit the height of the trailers you receive, closing the gap above lower vehicles.
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Planning, building control and safety law in England
Sites in Tyldesley fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about retractable dock shelters in Tyldesley
Which building and safety rules apply to a site in Tyldesley?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Tyldesley, we check what applies at survey and design to it.
Will you deal with building control and planning for a project in Tyldesley?
We check at survey whether the work is likely to need approval. Forming a new opening or dock pit may need Building Regulations approval, a building warrant or building control approval, depending on the nation, and external structures such as loading houses can need planning permission. Where approval is needed, we explain what is involved, work with your designer or agent, and build it into the programme.
How long does installation take at a site in Tyldesley?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
How do drivers know where to stop?
Bumpers set the stopping point, and many sites add dock lights, wheel guides and guide stripes on the shelter curtains to help drivers line up and reverse squarely. Traffic lights at the bay tell drivers when it is safe to reverse in and when they may leave.
Retractable dock shelters near Tyldesley
Looking beyond Tyldesley? Our pages for Leigh (2 miles), Walkden (3 miles) and Bolton (5 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Tyldesley
Full guide to retractable dock shelters · Everything we do in Tyldesley
Ready to talk about a loading bay in Tyldesley? Call us, or send the details through the quote form.