- Location
- Yate, Gloucestershire
- Main postcode district
- BS37
- Nearby (straight line)
- Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Where does this fit at a dock in Yate?
Shelter sizing for a bay in Yate starts with measuring the door and wall and recording the tallest, lowest and widest trailers you receive. Industrial landlords in Yate refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use.
Docks facing open ground in Yate can catch rain driven sideways into the bay, which a well-fitted retractable shelter helps keep out.
We do not give a fixed price without seeing the site. A free survey in Yate lets us check the details that affect the job, and the written quote that follows is a fixed price for the agreed scope. We plan the work around your operation, arrange out-of-hours access if you need it and manage specialist installation engineers throughout. Handover includes testing, a demonstration and the paperwork you need for your records.
Why do trailer door hinges matter when choosing a shelter?
Trailer door hinges matter because the rear doors are opened and folded back along the trailer sides before reversing, and the shelter has to accommodate them. If the shelter is too shallow, the hinges and doors sit outside it, leaving gaps or snagging the curtains.
A shelter handles this better than a seal:
- its side curtains drape over the opened doors and hinges rather than pressing against them,
- the full width of the trailer opening stays clear, because nothing protrudes in front of the trailer's rear frame,
- slit curtains wrap around hinge blocks without tearing.
By contrast, a dock seal presses against the rear of the trailer, so gaps at the hinges can remain, and poorly sized side pads can intrude into the opening. That is why shelters are generally favoured for mixed fleets, where hinge positions and trailer widths vary from one vehicle to the next.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Clear opening width and height for each door
- Scope to convert ground-level doors into docks or add lift tables
- Traffic routes for vehicles and separation of pedestrians
- Wheel guide positions and yard markings for reversing vehicles
- Drainage on recessed or sloping dock approaches
- Access for deliveries, cranes or lifting equipment during installation
Options to discuss
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Adjustable top curtain
A top curtain that can be lowered or raised to suit the height of the trailers you receive, closing the gap above lower vehicles.
Planning, building control and safety law in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Yate. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about retractable dock shelters in Yate
Can you work outside our normal operating hours in Yate?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How do you price retractable dock shelters for a site in Yate?
Guide budgets for supply and fit are £1,900 to £4,400 per shelter, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Can you work alongside our main contractor on a new build in Yate?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Can I replace just the curtains on an old shelter?
Yes, if the frame and fixings are sound, new top and side curtains can be fitted to an existing shelter, which is often the most economical way to restore it. The frame and springs are checked first, because new curtains on a failing frame will not last. This is handled as a repair, with the visit price agreed beforehand.
Will a shelter work with curtain-sided trailers?
Yes, retractable shelters suit curtain-siders well, as the side curtains drape along the trailer body. Where curtain-siders are loaded from the rear, the shelter closes the gaps around the sides and roof while leaving the full rear opening clear for forklifts and pallet trucks.
Retractable dock shelters near Yate
Looking beyond Yate? Our pages for Mangotsfield (5 miles), Kingswood (7 miles) and Keynsham (9 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Yate
Full guide to retractable dock shelters · Everything we do in Yate
For a written price on loading bay work in Yate, request a quote and include photos of the bay if you can.