- Location
- Cirencester, Gloucestershire
- Main postcode district
- GL7
- Nearby (straight line)
- Stroud (10 miles), Cheltenham (13 miles) and Swindon (14 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Is this right for your site in Cirencester?
Loading staff at a draughty dock in Cirencester notice the difference when the gaps around the trailer are closed, especially through the colder months. Docks facing open ground in Cirencester can catch rain driven sideways into the bay, which a well-fitted retractable shelter helps keep out.
Third-party logistics sites in Cirencester receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary.
The survey is free, the quote is written and the price is fixed: that is how every installation in Cirencester begins. We then manage the work from start to finish. Fitting is carried out by specialist installers under our management, phased so the operation keeps moving, and nights or weekends can be booked by arrangement. On the final day we test the equipment with you and hand over the operating and maintenance information.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
How is a retractable dock shelter installed?
A retractable shelter is fixed to the outside face of the building around the dock door, working from powered access equipment in the yard. A single shelter usually takes a few hours to a day, depending on its size and the wall it fixes to.
- The wall is checked for fixing points; on cladding, a steel subframe or spreader plates are often needed.
- The frame is fixed and set level, centred on the door and leveller.
- Top and side curtains are hung and trimmed to meet the trailers you receive.
- Bumpers are checked, since they set how far the trailer pushes into the shelter.
- The shelter is tested with a trailer reversing in where possible.
You will need to keep the yard area in front of the bay clear for access equipment and take the bay out of use during fitting. No power supply is needed, and neighbouring bays can keep working while each shelter goes up.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- How drivers are prevented from pulling away too early
- Traffic routes for vehicles and separation of pedestrians
- Drainage on recessed or sloping dock approaches
- Wheel guide positions and yard markings for reversing vehicles
- Scope to convert ground-level doors into docks or add lift tables
- Age and condition of the equipment already in place
Options to discuss
Guide stripes
Contrasting high-visibility stripes on the curtains that give drivers a clear target to aim for when reversing onto the bay.
Sprung-frame shelter
Side frames on springs that fold back when a trailer pushes in and recover when it leaves, a robust choice for busy docks and mixed fleets.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Cirencester. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about retractable dock shelters in Cirencester
Can you work alongside our main contractor on a new build in Cirencester?
Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.
Can you work outside our normal operating hours in Cirencester?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
What details do you need from us to quote for retractable dock shelters?
To get started, send the site address in Cirencester, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Does a dock shelter keep a building warm?
A shelter reduces the draughts and rain entering the dock around a trailer, which helps keep the loading area warmer. It does not seal as closely as a dock seal or inflatable shelter, so for chilled and frozen docks those options are usually preferred.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Retractable dock shelters near Cirencester
Looking beyond Cirencester? Our pages for Stroud (10 miles), Cheltenham (13 miles) and Swindon (14 miles) describe the same loading bay services and how to get in touch.
Other loading bay services in Cirencester
Full guide to retractable dock shelters · Everything we do in Cirencester
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Cirencester.