- Location
- Milford Haven, Dyfed
- Main postcode district
- SA73
- Nearby (straight line)
- Pembroke Dock (4 miles) and Haverfordwest (7 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Why do sites in Milford Haven choose this?
For a dock in Milford Haven where wide pallets need the full trailer opening, a shelter keeps that width clear while still closing the gaps. Industrial landlords in Milford Haven refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use.
If a shelter on an older unit in Milford Haven has a sound frame but torn, faded curtains, replacing just the curtains can be the economical choice.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Milford Haven site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
What regulations and permissions apply to a dock shelter?
A dock shelter is work equipment, so it must be suitable and kept in a safe condition, and on some projects planning, building control or landlord consent also needs checking. What applies depends on the nation and the scope of work.
- Equipment duties: PUWER 1998 in Great Britain, and PUWER (Northern Ireland) 1999, require shelters, like other dock equipment, to be suitable, maintained and inspected where deterioration could lead to danger. A damaged frame or loose curtain can strike a driver or vehicle.
- Regulator: HSE in Great Britain and HSENI in Northern Ireland.
- Planning: external structures such as loading houses, canopies or new dock approaches can need planning permission. If a shelter is part of wider external works, we check this at survey.
- Building control: forming a new opening for a door and shelter may need Building Regulations approval in England and Wales, a building warrant in Scotland or building control approval in Northern Ireland.
- Your lease: landlords often require consent for fixings to the building.
The same published guide range applies across Wales; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- How often each door cycles during a typical shift
- Headroom above the opening and which track type will suit it
- Temperature requirements for chilled, frozen or ambient goods
- Gaps around trailers where heated or chilled air escapes
- How drivers are prevented from pulling away too early
- Working hours, shift patterns and windows for out-of-hours work
Options to discuss
Rigid frame with long curtains
A fixed frame carrying long flexible curtains, useful where the trailer only needs to touch the curtains and the frame can stay clear of impact.
Sprung-frame shelter
Side frames on springs that fold back when a trailer pushes in and recover when it leaves, a robust choice for busy docks and mixed fleets.
Planning, building control and safety law in Wales
HSE regulates workplace safety in Wales. Loading bays in Milford Haven need doors that meet regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, work equipment maintained under PUWER, and safeguards that stop vehicles leaving the dock too early. We check what applies at survey and build those measures into the design.
Questions about retractable dock shelters in Milford Haven
Which building and safety rules apply to a site in Milford Haven?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Milford Haven, we check what applies at survey and design to it.
Is VAT included in your guide prices for retractable dock shelters?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Dyfed as everywhere else: for retractable dock shelters, it is £1,900 to £4,400 per shelter, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Is the site survey in Milford Haven free?
Yes. For new installations, replacements, upgrades, conversions and complete bays, the site survey and written quote are free and come with no obligation. The survey lets us measure the openings, check the dock and structure, and understand how the bay is used, so the quote reflects your site. Repair and servicing visits are different: they are chargeable, with the price agreed before anyone attends.
How do drivers know where to stop?
Bumpers set the stopping point, and many sites add dock lights, wheel guides and guide stripes on the shelter curtains to help drivers line up and reverse squarely. Traffic lights at the bay tell drivers when it is safe to reverse in and when they may leave.
What projection should a dock shelter have?
Projection should be deep enough to clear opened trailer doors and hinges and to suit the leveller lip and bumpers. Shelters are commonly made with projections from around 500 to 1,000 mm, and we recommend a depth once we know your trailers and leveller.
Retractable dock shelters near Milford Haven
If your site is not in Milford Haven itself, it may be near one of these: Pembroke Dock (4 miles) and Haverfordwest (7 miles). Pick the closest.
Other loading bay services in Milford Haven
Full guide to retractable dock shelters · Everything we do in Milford Haven
Phone us to discuss your loading bay in Milford Haven, or start with the online quote tool if you prefer to send details first.