- Location
- Plymouth, Devon
- Main postcode districts
- PL2 and PL4
- Nearby (straight line)
- Saltash (4 miles), Paignton (26 miles) and Newton Abbot (26 miles)
- Survey and quote
- Free, with a fixed written quote
A retractable dock shelter is a fabric shelter fixed to the building around a loading bay door, with flexible top and side curtains carried on a sprung or pantograph steel frame. When a trailer reverses in, the frame retracts and the curtains drape against the trailer's sides and roof, closing most of the gap while leaving the full width of the trailer opening clear for loading.
Is this right for your site in Plymouth?
Industrial landlords in Plymouth refreshing a multi-let estate can fit shelters that suit a range of future tenants and the trailers they may use. Third-party logistics sites in Plymouth receiving trailers from many hauliers usually need a shelter rather than a seal, because widths and heights vary.
Retail and e-commerce distribution centres in Plymouth with high trailer turnover need tough sprung-frame shelters that recover quickly after each departure.
If you are planning retractable dock shelters for a site in Plymouth, expect four stages. A free survey and fixed written quote come first. We then agree a programme with you, including any out-of-hours work. Specialist installation engineers carry out the installation under our management, with us as your single point of contact. Finally, the equipment is tested, your staff are shown how it works and everything is handed over with its documentation.
How do I size a retractable shelter for my trailers?
Size a retractable shelter to the largest trailer you receive, with a projection deep enough for opened trailer doors and the leveller lip, and curtains that still reach the smallest vehicles. The trailer mix sets almost every dimension.
- Width: wider than the trailer, so the side curtains drape along its sides rather than across the opening.
- Height: high enough for the tallest trailers, with a top curtain deep enough to reach the roof of the lowest.
- Projection: deep enough for the rear doors, folded back along the trailer sides, to sit inside the curtains.
- Curtain cut-outs: vertical slits let the side curtains wrap around hinges and rear fittings without tearing.
- Guide stripes: contrasting stripes on the curtains help drivers centre the trailer.
If your fleet is uniform, a seal may give a tighter fit. Our guide to shelters and seals sets out the trade-offs.
Why do trailer door hinges matter when choosing a shelter?
Trailer door hinges matter because the rear doors are opened and folded back along the trailer sides before reversing, and the shelter has to accommodate them. If the shelter is too shallow, the hinges and doors sit outside it, leaving gaps or snagging the curtains.
A shelter handles this better than a seal:
- its side curtains drape over the opened doors and hinges rather than pressing against them,
- the full width of the trailer opening stays clear, because nothing protrudes in front of the trailer's rear frame,
- slit curtains wrap around hinge blocks without tearing.
By contrast, a dock seal presses against the rear of the trailer, so gaps at the hinges can remain, and poorly sized side pads can intrude into the opening. That is why shelters are generally favoured for mixed fleets, where hinge positions and trailer widths vary from one vehicle to the next.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Forklift and pallet truck loads crossing the leveller platform
- Condition of any existing leveller pit, kerb angles and pit drainage
- Working hours, shift patterns and windows for out-of-hours work
- How often each door cycles during a typical shift
- Access for deliveries, cranes or lifting equipment during installation
- Wheel guide positions and yard markings for reversing vehicles
Options to discuss
Slit side curtains
Vertical cuts in the side curtains that let them wrap around trailer door hinges and rear fittings without tearing, extending curtain life.
Adjustable top curtain
A top curtain that can be lowered or raised to suit the height of the trailers you receive, closing the gap above lower vehicles.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Plymouth, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about retractable dock shelters in Plymouth
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Plymouth, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
What details do you need from us to quote for retractable dock shelters?
To get started, send the site address in Plymouth, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can you work outside our normal operating hours in Plymouth?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Can I replace just the curtains on an old shelter?
Yes, if the frame and fixings are sound, new top and side curtains can be fitted to an existing shelter, which is often the most economical way to restore it. The frame and springs are checked first, because new curtains on a failing frame will not last. This is handled as a repair, with the visit price agreed beforehand.
Will a shelter work with curtain-sided trailers?
Yes, retractable shelters suit curtain-siders well, as the side curtains drape along the trailer body. Where curtain-siders are loaded from the rear, the shelter closes the gaps around the sides and roof while leaving the full rear opening clear for forklifts and pallet trucks.
Retractable dock shelters near Plymouth
Distances are measured from Plymouth. Nearby towns we cover include Saltash (4 miles), Paignton (26 miles) and Newton Abbot (26 miles), and other towns in the area are covered too.
Other loading bay services in Plymouth
Full guide to retractable dock shelters · Everything we do in Plymouth
Ready to talk about a loading bay in Plymouth? Call us, or send the details through the quote form.