Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Bradford

PVC strip curtains in Bradford

We take enquiries about PVC strip curtains from businesses in Bradford and across West Yorkshire, and manage each job from the first conversation to completion, with specialist engineers working under our management.

Guide £180–£1,100 per opening ex VATFree site surveyBD1, BD2, BD3
Location
Bradford, West Yorkshire
Main postcode districts
BD1, BD2 and BD3
Nearby (straight line)
Shipley (3 miles), Pudsey (4 miles) and Cleckheaton (5 miles)
Survey and quote
Free, with a fixed written quote
PVC strip curtains, in short

A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.

How does this suit sites in Bradford?

Smaller trade units in Bradford with a single goods door may find a strip curtain the most economical way to keep the working area warmer in winter. Wind-driven rain and leaves blowing into an open dock are a familiar nuisance, and a heavy-duty strip curtain is one simple response for sites in Bradford.

Measuring an opening in Bradford for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.

Our part of the job in Bradford is to survey, quote and manage; the fitting itself is done by specialist installation engineers working under our management. The survey and the written quote are free. Once the fixed price is accepted, we agree dates that work around your deliveries and shifts, including out-of-hours working where needed. Every installation is tested before handover, and you receive the documentation for each item fitted.

How are strip curtains fitted to a loading bay opening?

Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.

  • Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
  • Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
  • Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.

At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.

How much do PVC strip curtains cost?

PVC strip curtains typically cost £180 to £1,100 per opening, excluding VAT, supply and fit. Small pedestrian doorways sit at the bottom of the range, and large dock openings with heavy-duty strips and sliding rails at the top.

The price depends on:

  • Opening size: the width sets the number of strips and the height sets their length.
  • Strip width and thickness: wider, thicker strips cost more but last longer under forklift traffic.
  • Overlap: a greater overlap seals better and uses more material.
  • Grade: standard, low-temperature, ribbed, anti-static, tinted or welding grades.
  • Rail type: a fixed rail, or a sliding or swing-away rail that clears the opening for large loads.
  • Fixing: whether the rail fixes straight to the lintel or needs brackets or a steel header.

Because strips wear, we can also price spare strips so your team can replace damaged ones. The written quote after a free site survey is the fixed price, and you can start the process through our quote form.

Guide price, Bradford
£180–£1,100 per opening, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What we look at on site

  • Working hours, shift patterns and windows for out-of-hours work
  • Gaps around trailers where heated or chilled air escapes
  • Control positions, isolators and any existing interlocks
  • Whether planning, building control or a building warrant may be needed
  • Bumper position and wear or damage on the dock face
  • Access for deliveries, cranes or lifting equipment during installation

Options to discuss

Ribbed strips

Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.

Sliding or swing-away rail

A rail that lets the whole curtain be moved clear of the opening for wide loads, cleaning or seasonal removal without taking the strips down.

Regulations and approvals in England

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Bradford. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about PVC strip curtains in Bradford

Do you cover Bradford for PVC strip curtains?

Yes. We take on PVC strip curtains for businesses in Bradford and across West Yorkshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.

How long does installation take at a site in Bradford?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

Can you work outside our normal operating hours in Bradford?

Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.

Should the strips touch the floor?

Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.

Can strips be replaced individually?

Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.

PVC strip curtains near Bradford

Other towns within reach of Bradford on our coverage list include Shipley (3 miles), Pudsey (4 miles) and Cleckheaton (5 miles), all covered on the same terms.

Other loading bay services in Bradford

Full guide to PVC strip curtains · Everything we do in Bradford

Use the quote tool to tell us about the doors, levellers or shelters at your Bradford site, and we will be in touch to arrange the next step.

Call freeGet a quote