- Location
- Gateshead, Tyne and Wear
- Main postcode district
- NE8
- Nearby (straight line)
- Newcastle upon Tyne (1 mile), Felling (1 mile) and Gosforth (3 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
Where does this fit at a dock in Gateshead?
Where strips at a site in Gateshead have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening. Smaller trade units in Gateshead with a single goods door may find a strip curtain the most economical way to keep the working area warmer in winter.
Measuring an opening in Gateshead for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.
Here is what happens after you contact us about a site in Gateshead. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.
Worth knowing if you run a loading operation from Gateshead or nearby: the Team Valley Trading Estate is one of the largest trading estates in the North East. When specifying a bay, the trailer mix and dock height are what count.
How much do PVC strip curtains cost?
PVC strip curtains typically cost £180 to £1,100 per opening, excluding VAT, supply and fit. Small pedestrian doorways sit at the bottom of the range, and large dock openings with heavy-duty strips and sliding rails at the top.
The price depends on:
- Opening size: the width sets the number of strips and the height sets their length.
- Strip width and thickness: wider, thicker strips cost more but last longer under forklift traffic.
- Overlap: a greater overlap seals better and uses more material.
- Grade: standard, low-temperature, ribbed, anti-static, tinted or welding grades.
- Rail type: a fixed rail, or a sliding or swing-away rail that clears the opening for large loads.
- Fixing: whether the rail fixes straight to the lintel or needs brackets or a steel header.
Because strips wear, we can also price spare strips so your team can replace damaged ones. The written quote after a free site survey is the fixed price, and you can start the process through our quote form.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What do we check at the survey?
- Drainage on recessed or sloping dock approaches
- How often each door cycles during a typical shift
- Lighting inside trailers and at the dock face
- Bumper position and wear or damage on the dock face
- Clear opening width and height for each door
- Headroom above the opening and which track type will suit it
Options to discuss
Ribbed strips
Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.
Low-temperature strips
A grade formulated to stay flexible in chillers and freezers, where standard strips would stiffen, crack and stop falling back into place.
Planning, building control and safety law in England
Workplace safety in England is regulated by HSE. For a loading bay in Gateshead, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about PVC strip curtains in Gateshead
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Gateshead site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
How do you price PVC strip curtains for a site in Gateshead?
Guide budgets for supply and fit are £180 to £1,100 per opening, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Can you work outside our normal operating hours in Gateshead?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
How do I clean PVC strip curtains?
Clean strips with warm water and a mild detergent, then wipe them dry. Avoid solvents and abrasive pads, which damage the surface and make strips cloud faster. In food areas, follow your site's hygiene schedule and choose a grade suited to regular cleaning.
Are strip curtains a good alternative to a high-speed door?
Strip curtains are a good low-cost option for moderate traffic, but at very busy openings a high-speed door often performs better because it clears fully for each vehicle and closes behind it. The right choice depends on traffic volume, visibility needs and budget.
PVC strip curtains near Gateshead
Sites close to Gateshead get the same service, including those in Newcastle upon Tyne (1 mile), Felling (1 mile) and Gosforth (3 miles), with every job run the same way.
Other loading bay services in Gateshead
Full guide to PVC strip curtains · Everything we do in Gateshead
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Gateshead.
