- Location
- Burntwood, Staffordshire
- Main postcode district
- WS7
- Nearby (straight line)
- Great Wyrley (4 miles), Lichfield (4 miles) and Cannock (4 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
Why do sites in Burntwood choose this?
In a warehouse in Burntwood where doors stay open for much of the shift, strip curtains offer a practical first step before considering a high-speed door. Smaller trade units in Burntwood with a single goods door may find a strip curtain the most economical way to keep the working area warmer in winter.
Where strips at a site in Burntwood have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening.
Here is what happens after you contact us about a site in Burntwood. We arrange a free survey, measure up and send a fixed written quote. If you go ahead, we manage the whole job, including ordering, delivery and coordination with your site team. Specialist installation engineers working under our management do the fitting, at times built around your loading schedule, with out-of-hours work by arrangement. Testing and handover documents close the job.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Drainage on recessed or sloping dock approaches
- Yard gradient and the slope of the approach to the dock
- Clear opening width and height for each door
- Control positions, isolators and any existing interlocks
- Bumper position and wear or damage on the dock face
- Gaps around trailers where heated or chilled air escapes
Options to discuss
Sliding or swing-away rail
A rail that lets the whole curtain be moved clear of the opening for wide loads, cleaning or seasonal removal without taking the strips down.
Standard clear strips
Clear flexible PVC for ambient warehouses and goods-in areas, giving good visibility and draught control at pedestrian and forklift openings.
Regulations and approvals in England
Sites in Burntwood fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions about PVC strip curtains in Burntwood
Which building and safety rules apply to a site in Burntwood?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Burntwood, we check what applies at survey and design to it.
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Burntwood, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
How long does installation take at a site in Burntwood?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Should the strips touch the floor?
Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.
How do I clean PVC strip curtains?
Clean strips with warm water and a mild detergent, then wipe them dry. Avoid solvents and abrasive pads, which damage the surface and make strips cloud faster. In food areas, follow your site's hygiene schedule and choose a grade suited to regular cleaning.
PVC strip curtains near Burntwood
Other towns within reach of Burntwood on our coverage list include Great Wyrley (4 miles), Lichfield (4 miles) and Cannock (4 miles), all covered on the same terms.
Other loading bay services in Burntwood
Full guide to PVC strip curtains · Everything we do in Burntwood
Ready to talk about a loading bay in Burntwood? Call us, or send the details through the quote form.