A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
Why do sites in Norfolk choose this?
Goods-in areas in Norfolk that leave the main door open during long unloading sessions can use a strip curtain to hold back draughts and dust. Measuring an opening in Norfolk for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.
Where strips at a site in Norfolk have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening.
We never ask you to commit before you have a fixed price. A free survey at your Norfolk site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.
Are strip curtains safe where forklifts and pedestrians share an opening?
Strip curtains can be used where forklifts and pedestrians share an opening, but only if the strips stay clear enough for both to see through and the route is managed. Visibility is the main risk.
- Clear strips scratch and cloud with use, so a driver may not see a person on the other side.
- Ribbed strips and regular replacement keep visibility better for longer.
- A separate pedestrian door beside the vehicle opening is the safer arrangement.
- Floor markings and mirrors help where a separate door is not possible.
At very busy openings, a high-speed dock door with vision panels and safety sensors may be the better long-term answer, because it opens fully for each vehicle and closes again behind it. We can price both so you can compare the cost and the practical difference for your traffic.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Towns we cover in Norfolk
We provide PVC strip curtains right across Norfolk. Pick the town closest to your site from the list below.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Planning, building control and safety law in England
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Norfolk. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions
What details do you need from us to quote for PVC strip curtains?
To get started, send the site address in Norfolk, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.
Can you work outside our normal operating hours in Norfolk?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Are strip curtains a good alternative to a high-speed door?
Strip curtains are a good low-cost option for moderate traffic, but at very busy openings a high-speed door often performs better because it clears fully for each vehicle and closes behind it. The right choice depends on traffic volume, visibility needs and budget.
Should the strips touch the floor?
Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.
Other services in Norfolk
Full guide to PVC strip curtains · All loading bay services in Norfolk