- Location
- Ryde, Isle of Wight
- Main postcode district
- PO33
- Nearby (straight line)
- Gosport (5 miles), Sandown (5 miles) and Portsmouth (6 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
Where does this fit at a dock in Ryde?
Where strips at a site in Ryde have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening. Smaller trade units in Ryde with a single goods door may find a strip curtain the most economical way to keep the working area warmer in winter.
Chilled rooms off a dock in Ryde can lose temperature through internal doorways, and a low-temperature strip curtain is a quick, inexpensive fix.
The survey is free, the quote is written and the price is fixed: that is how every installation in Ryde begins. We then manage the work from start to finish. Fitting is carried out by specialist installers under our management, phased so the operation keeps moving, and nights or weekends can be booked by arrangement. On the final day we test the equipment with you and hand over the operating and maintenance information.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Which strip width, thickness and grade should I choose?
Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.
- Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
- Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
- Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
- Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
- Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
- Specialist grades: anti-static, tinted or opaque, or welding grade for screening.
Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Clear opening width and height for each door
- Wall and steel structure for door, shelter and bumper fixings
- Traffic routes for vehicles and separation of pedestrians
- Escape routes and pedestrian doors close to the bay
- How drivers are prevented from pulling away too early
- Control positions, isolators and any existing interlocks
Options to discuss
Sliding or swing-away rail
A rail that lets the whole curtain be moved clear of the opening for wide loads, cleaning or seasonal removal without taking the strips down.
Low-temperature strips
A grade formulated to stay flexible in chillers and freezers, where standard strips would stiffen, crack and stop falling back into place.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Ryde. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Sites in and around Ryde are covered by arrangement. There is no charge for the survey or the written quote, and any travel, ferry crossings or overnight stays needed for the installation itself are itemised in the quote, so you see the full price before agreeing.
Questions about PVC strip curtains in Ryde
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Ryde, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
Can you work outside our normal operating hours in Ryde?
Yes, by arrangement. Evening, night and weekend working can be planned so the installation causes as little disruption as possible to your loading schedule. Out-of-hours work can affect the price, so mention it at the survey and we will include it in the written quote. The agreed times are confirmed in the programme before the job starts.
Is VAT included in your guide prices for PVC strip curtains?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in the Isle of Wight as everywhere else: for PVC strip curtains, it is £180 to £1,100 per opening, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Do strip curtains work at an external dock opening?
Yes, strip curtains are often hung just inside an external dock door to reduce draughts while the door is open for loading. They are not a substitute for the door itself, which still closes the opening for security and weather whenever the bay is not in use.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
PVC strip curtains near Ryde
If your site is not in Ryde itself, it may be near one of these: Gosport (5 miles), Sandown (5 miles) and Portsmouth (6 miles). Pick the closest.
Other loading bay services in Ryde
Full guide to PVC strip curtains · Everything we do in Ryde
Tell us what is happening at your Ryde dock, what equipment is there and when it is used, and we will suggest the right next step.