- Location
- New Mills, Derbyshire
- Main postcode district
- SK12
- Nearby (straight line)
- Glossop (6 miles), Hyde (7 miles) and Stockport (7 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
What should sites in New Mills consider?
In a warehouse in New Mills where doors stay open for much of the shift, strip curtains offer a practical first step before considering a high-speed door. Measuring an opening in New Mills for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.
Goods-in areas in New Mills that leave the main door open during long unloading sessions can use a strip curtain to hold back draughts and dust.
How does an installation in New Mills work? First, a free, no-obligation survey to measure up and understand the operation. Next, a fixed written quote. Then a programme agreed with you, so the work fits around deliveries, with out-of-hours slots if needed. The installation itself is carried out by specialist engineers who answer to us, and it finishes with testing, a walk-through for your staff and a handover pack.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
Do strip curtains count towards building energy rules?
A strip curtain does not replace the need for a compliant door: where a new or replacement external loading bay door is fitted, it is the door that has to meet the energy rules.
- England: Approved Document L (2021) Volume 2 sets a limiting U-value of 1.3 W/m²K for vehicle access and similar large doors in new and replacement work.
- Wales, Scotland and Northern Ireland: each nation has its own energy rules, through Approved Document L for Wales, Section 6 of the Scottish Building Standards Technical Handbook, and Technical Booklet F2 in Northern Ireland. We confirm what applies to your nation and project.
What a strip curtain does well is reduce the air moving through an opening while the door is open for loading. That helps a heated or chilled building, even though the curtain is not the door.
Workplace safety still applies around the curtain: strips should stay clear enough for drivers and pedestrians to see each other. HSE is the regulator in Great Britain and HSENI in Northern Ireland.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What does the free survey cover?
- Scope to convert ground-level doors into docks or add lift tables
- Power supply at each bay, including three-phase availability
- Lighting inside trailers and at the dock face
- Age and condition of the equipment already in place
- Dock height and the mix of trailers you load
- Working hours, shift patterns and windows for out-of-hours work
Options to discuss
Standard clear strips
Clear flexible PVC for ambient warehouses and goods-in areas, giving good visibility and draught control at pedestrian and forklift openings.
Sliding or swing-away rail
A rail that lets the whole curtain be moved clear of the opening for wide loads, cleaning or seasonal removal without taking the strips down.
What do the rules in England mean for the work?
Workplace safety in England is regulated by HSE. For a loading bay in New Mills, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies at survey and design the bay accordingly.
Questions about PVC strip curtains in New Mills
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your New Mills site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Is VAT included in your guide prices for PVC strip curtains?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Derbyshire as everywhere else: for PVC strip curtains, it is £180 to £1,100 per opening, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
Which building and safety rules apply to a site in New Mills?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in New Mills, we check what applies at survey and design to it.
Can strips be replaced individually?
Yes, individual strips can be unhooked or unclamped and replaced without taking down the whole curtain. Keeping a few spare strips on site lets your team swap damaged ones as soon as they appear, which keeps visibility and sealing consistent across the opening.
Should the strips touch the floor?
Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.
PVC strip curtains near New Mills
Other towns within reach of New Mills on our coverage list include Glossop (6 miles), Hyde (7 miles) and Stockport (7 miles), all covered on the same terms.
Other loading bay services in New Mills
Full guide to PVC strip curtains · Everything we do in New Mills
Use the quote tool to tell us about the doors, levellers or shelters at your New Mills site, and we will be in touch to arrange the next step.