- Location
- Chester, Cheshire
- Main postcode district
- CH1
- Nearby (straight line)
- Deeside (6 miles), Ellesmere Port (6 miles) and Buckley (8 miles)
- Survey and quote
- Free, with a fixed written quote
A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.
Where does this fit at a dock in Chester?
Where strips at a site in Chester have turned cloudy and scratched, replacing them restores visibility for drivers and pedestrians sharing the opening. Measuring an opening in Chester for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.
In a warehouse in Chester where doors stay open for much of the shift, strip curtains offer a practical first step before considering a high-speed door.
Before anything is ordered, we visit your site in Chester for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
How are strip curtains fitted to a loading bay opening?
Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.
- Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
- Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
- Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.
At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.
How much do PVC strip curtains cost?
PVC strip curtains typically cost £180 to £1,100 per opening, excluding VAT, supply and fit. Small pedestrian doorways sit at the bottom of the range, and large dock openings with heavy-duty strips and sliding rails at the top.
The price depends on:
- Opening size: the width sets the number of strips and the height sets their length.
- Strip width and thickness: wider, thicker strips cost more but last longer under forklift traffic.
- Overlap: a greater overlap seals better and uses more material.
- Grade: standard, low-temperature, ribbed, anti-static, tinted or welding grades.
- Rail type: a fixed rail, or a sliding or swing-away rail that clears the opening for large loads.
- Fixing: whether the rail fixes straight to the lintel or needs brackets or a steel header.
Because strips wear, we can also price spare strips so your team can replace damaged ones. The written quote after a free site survey is the fixed price, and you can start the process through our quote form.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
What we look at on site
- Dock height and the mix of trailers you load
- Age and condition of the equipment already in place
- Wind exposure at the dock, which affects door and shelter choice
- Working hours, shift patterns and windows for out-of-hours work
- Escape routes and pedestrian doors close to the bay
- Control positions, isolators and any existing interlocks
Options to discuss
Ribbed strips
Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.
Low-temperature strips
A grade formulated to stay flexible in chillers and freezers, where standard strips would stiffen, crack and stop falling back into place.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Chester. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about PVC strip curtains in Chester
Which building and safety rules apply to a site in Chester?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in Chester, we check what applies at survey and design to it.
How do you price PVC strip curtains for a site in Chester?
Guide budgets for supply and fit are £180 to £1,100 per opening, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
What warranty comes with new loading bay equipment?
New equipment comes with the manufacturer's warranty, which varies by product. Our workmanship terms are set out in writing in the quote for your Chester site, so you can see what is covered before you commit. Check the warranty terms for any servicing conditions, and we can quote for planned maintenance once the installation is complete.
Should the strips touch the floor?
Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.
How do I clean PVC strip curtains?
Clean strips with warm water and a mild detergent, then wipe them dry. Avoid solvents and abrasive pads, which damage the surface and make strips cloud faster. In food areas, follow your site's hygiene schedule and choose a grade suited to regular cleaning.
PVC strip curtains near Chester
Close neighbours of Chester with their own pages here: Deeside (6 miles), Ellesmere Port (6 miles) and Buckley (8 miles). Choose one to see coverage details for that town.
Other loading bay services in Chester
Full guide to PVC strip curtains · Everything we do in Chester
Request a quote for your loading bay in Chester, attaching photos of the dock, the equipment and any damage.