Loading bay doors and dock equipment, UK-wideFree site survey for new docks and upgradesRepair visits priced before we attend
Call free 0800 088 6248
Loading bay doors · Newport Pagnell

PVC strip curtains in Newport Pagnell

When you need PVC strip curtains in Newport Pagnell or anywhere else in Buckinghamshire, we organise the job end to end and keep disruption to your loading operation as low as we can.

Guide £180–£1,100 per opening ex VATFree site surveyMK16
Location
Newport Pagnell, Buckinghamshire
Main postcode district
MK16
Nearby (straight line)
Milton Keynes (3 miles), Bletchley (7 miles) and Kempston (10 miles)
Survey and quote
Free, with a fixed written quote
PVC strip curtains, in short

A PVC strip curtain is a row of flexible, overlapping plastic strips hung from a rail across a doorway, so that people and vehicles can pass through while the strips fall back to close the gap behind them. At loading bays they hang behind the main door or across internal openings, reducing draughts, dust and temperature loss for much less than the cost of a powered door.

Where does this fit at a dock in Newport Pagnell?

Goods-in areas in Newport Pagnell that leave the main door open during long unloading sessions can use a strip curtain to hold back draughts and dust. Chilled rooms off a dock in Newport Pagnell can lose temperature through internal doorways, and a low-temperature strip curtain is a quick, inexpensive fix.

Measuring an opening in Newport Pagnell for a strip curtain takes only a short visit, and we note traffic, temperature and fixings at the same time.

We never ask you to commit before you have a fixed price. A free survey at your Newport Pagnell site comes first, followed by a written quote. When the order goes ahead, we plan the installation around your operation, book any out-of-hours working you need and manage the specialist installation engineers on site. The job ends with a full test, a run-through for the people who will use the equipment and a set of handover documents.

How are strip curtains fitted to a loading bay opening?

Strip curtains are fitted by fixing a rail across the head of the opening and hanging the strips from it, a job that usually takes an hour or two per opening and needs no power supply.

  • Fixed rails: bolted to the lintel or wall above the opening, with strips hooked or clamped on.
  • Sliding rails: let the whole curtain be pushed to one side for wide loads or warmer months.
  • Swing-away rails: hinge back against the wall, useful where a door track runs close to the head of the opening.

At a dock the curtain usually sits just inside the main door, so we check it will not snag the door's bottom edge, the leveller lip or any tracks. From you we need the opening clear for the visit and agreement on whether strips should reach the floor or stop just above it. Strips that drag on the floor wear quickly and can catch on pallet trucks.

Which strip width, thickness and grade should I choose?

Choose the strip size by the size of the opening and the traffic through it, and the grade by temperature and use. Wider, thicker strips seal better and resist forklifts, but are heavier to push through on foot.

  • Pedestrian doorways: typically 200 mm wide by 2 mm thick strips with a modest overlap.
  • Forklift openings: typically 300 mm wide by 3 mm thick, with a larger overlap.
  • Large dock openings: typically 400 mm wide by 4 mm thick, which hang well in draughts.
  • Low-temperature grade: stays flexible in chillers and freezers, where standard PVC would stiffen and crack.
  • Ribbed strips: raised ribs take the wear from forklifts and keep the strips clearer for longer.
  • Specialist grades: anti-static, tinted or opaque, or welding grade for screening.

Overlap matters as much as thickness. A full overlap gives a better seal in cold or dusty areas, while a partial overlap is easier to walk through.

Guide price, Newport Pagnell
£180–£1,100 per opening, ex VAT

The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.

What we look at on site

  • Wheel guide positions and yard markings for reversing vehicles
  • Scope to convert ground-level doors into docks or add lift tables
  • Wall and steel structure for door, shelter and bumper fixings
  • Traffic routes for vehicles and separation of pedestrians
  • Working hours, shift patterns and windows for out-of-hours work
  • Control positions, isolators and any existing interlocks

Options to discuss

Ribbed strips

Strips with raised ribs that take the abrasion from forklifts and pallets, helping them stay clearer for longer at busy openings.

Standard clear strips

Clear flexible PVC for ambient warehouses and goods-in areas, giving good visibility and draught control at pedestrian and forklift openings.

Regulations and approvals in England

Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Newport Pagnell. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.

Questions about PVC strip curtains in Newport Pagnell

How long does installation take at a site in Newport Pagnell?

It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.

What details do you need from us to quote for PVC strip curtains?

To get started, send the site address in Newport Pagnell, the number of bays or openings, approximate sizes, and photos of the dock from inside and outside. Tell us what vehicles you load, what goods you handle and any temperature requirements. Drawings help on new builds. We then arrange the free survey and confirm the details before the written quote is issued.

Can you work alongside our main contractor on a new build in Newport Pagnell?

Yes. For new warehouses and fit-outs, we can supply and install the dock package as part of a wider project, working to the main contractor's programme, site rules and permits. We will need drawings, dock levels and the programme, and we coordinate pit details, power supplies and door openings with the relevant trades before installation begins.

Do strip curtains work at an external dock opening?

Yes, strip curtains are often hung just inside an external dock door to reduce draughts while the door is open for loading. They are not a substitute for the door itself, which still closes the opening for security and weather whenever the bay is not in use.

Should the strips touch the floor?

Strips usually stop just above the floor so they do not drag, wear or catch on pallet trucks. Where draughts or pests are a concern they can be set closer to the floor, and we agree the finished height with you before fitting so it suits the traffic through the opening.

PVC strip curtains near Newport Pagnell

If your site is not in Newport Pagnell itself, it may be near one of these: Milton Keynes (3 miles), Bletchley (7 miles) and Kempston (10 miles). Pick the closest.

Other loading bay services in Newport Pagnell

Full guide to PVC strip curtains · Everything we do in Newport Pagnell

Speak to us about your Newport Pagnell loading bay. We will ask the right questions, then set out the next step clearly.

Call freeGet a quote