Loading houses in Ascot

Location

Ascot, Berkshire

Main postcode district

SL5

Nearby (straight line)

Bracknell (3 miles), Egham (5 miles) and Crowthorne (6 miles)

Survey and quote

Free, with a fixed written quote

What should sites in Ascot consider?

For older buildings in Ascot with a raised floor and little internal space by the wall, an external house can provide a modern hydraulic dock without major alterations. Racked warehouses around Ascot that cannot spare internal floor space for a dock can move the leveller outside the wall into a loading house instead.

Where a yard in Ascot is narrow, an angled loading house lets trailers approach on a diagonal and can sometimes fit more bays along one wall.

Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Ascot site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.

When is a loading house better than an internal dock?

A loading house is usually the better option when the building floor is already at dock height but there is no practical way to form a leveller pit inside. It moves the whole dock outside the wall, leaving the internal floor clear.

• No room inside: racking, production lines or mezzanines sit right up to the wall.
• Difficult slab: the floor slab carries services or is unsuited to breaking out for a pit.
• Thermal control: the building door closes at the wall line, so the leveller sits outside the heated or chilled space when no trailer is docked.
• Security: the building can be closed at the wall line while the house itself stays open to the yard.
• Narrow yards: an angled house lets trailers approach on a diagonal and can fit more bays along one wall.

Where the building floor is at yard level, a loading house alone will not solve the height difference, and a recessed approach or lift table is usually needed instead.

How much does a loading house cost?

A loading house typically costs £14,500 to £32,000 per house, supplied and installed, excluding VAT. That covers the insulated structure with its leveller and shelter or seal; the figure for your site depends on size, layout and what has to happen to the building and yard.

What moves the price:

• Size and layout: straight houses are simpler than angled ones, and larger houses use more steel and panel.
• Leveller type: telescopic-lip levellers cost more than swing-lip.
• Front sealing: inflatable shelters cost more than retractable shelters or foam seals.
• Foundations: ground conditions and buried services decide the size of pads or footings.
• Building works: forming or enlarging the wall opening, and a new insulated door if needed.
• Electrics and access: supply to the leveller and lights, crane access and any out-of-hours working.

These are guide budgets. After a free site survey we send a written quote that is the fixed price. VAT is added at the standard rate.

What do we check at the survey?

• Yard gradient and the slope of the approach to the dock
• Dock height and the mix of trailers you load
• Gaps around trailers where heated or chilled air escapes
• Condition of any existing leveller pit, kerb angles and pit drainage
• Drainage on recessed or sloping dock approaches
• Escape routes and pedestrian doors close to the bay

Options to discuss

Planning, building control and safety law in England

Sites in Ascot fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.

Questions about loading houses in Ascot

Loading houses near Ascot

Distances are measured from Ascot. Nearby towns we cover include Bracknell (3 miles), Egham (5 miles) and Crowthorne (6 miles), and other towns in the area are covered too.

• Bracknell
• Egham
• Crowthorne
• Camberley
• Windsor
• All of Berkshire

Other loading bay services in Ascot

• High-speed dock doorsFast-acting fabric doors for busy docks and internal openings.
• Vehicle restraintsWheel-based restraints that stop a trailer moving until it is safe.
• Swing-lip dock levellersHydraulic pit levellers with a hinged lip for everyday trailer loading.
• Loading bay door repairsRepairs to sectional doors, shutters and high-speed doors at the dock.
• Roller shutter loading bay doorsSteel or aluminium roller shutters for docks and goods-in openings.
• Complete loading bay installationDoor, leveller, shelter and safety kit supplied and fitted as one package.

Full guide to loading houses · Everything we do in Ascot

Request a quote for your loading bay in Ascot, attaching photos of the dock, the equipment and any damage.