- Location
- Shirley, West Midlands
- Main postcode district
- B90
- Nearby (straight line)
- Solihull (2 miles), Birmingham (6 miles) and Washwood Heath (6 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Why do sites in Shirley choose this?
Food, chilled and pharmaceutical operations around Shirley often prefer servicing outside loading peaks, which can be arranged with the price agreed beforehand. When you take on a unit in Shirley with no maintenance history, a baseline service report gives you a clear starting point for future planning.
Ahead of an insurer inspection, sites near Shirley can line up a service visit so routine defects are dealt with before the inspector attends.
We do not turn up and then name a price. Every repair or service visit in Shirley is agreed in writing first, including what the charge covers. Sending photos of the damage, error codes or leaks helps us diagnose the problem before travelling and bring the likely parts. Any additional work found on the day is quoted for your approval before it starts. You then get a written report for your records.
What happens on site during a service visit?
During a service visit the engineer works through the dock bay by bay, taking each item out of use only while it is being checked. Most of the dock keeps working throughout.
- Agree the order: the engineer meets the dock manager and agrees which bays are released when.
- Isolate: each item is isolated and locked off, and levellers are propped before anyone works underneath.
- Service and test: checks, adjustments and safety device tests are carried out.
- Hand back: each bay is returned to use once tested, with any unsafe item left out of use and reported straight away.
It helps if you can provide an equipment list with asset numbers, previous service and insurer reports, a contact on the day, and bays released as agreed. Out-of-hours visits can be arranged where daytime access is difficult, at a price agreed beforehand.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What we look at around the bay
- Leveller toe guards and side skirting, where fitted
- Previous service and inspection records, where available
- Shelter curtains, frames and side pads for tears
- Control panels, push buttons and emergency stops
- Safety edges, photocells and light curtains
- Anti-fall device on upward-opening doors
Options to discuss
Twice-yearly service
Two visits a year, common for busy docks, so wear on springs, hydraulics and shelter curtains is caught before it causes a breakdown at a busy time.
High-use programme
More frequent visits for docks running several shifts or very high trailer numbers, with the interval agreed after reviewing the equipment and how it is used.
Regulations and approvals in England
Workplace safety in England is regulated by HSE. For a loading bay in Shirley, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions about loading bay servicing in Shirley
How is a repair or service visit in Shirley priced?
Repair and service visits are chargeable, and the price is agreed in writing before anyone attends. For loading bay servicing, the guide budget is £85 to £180 per item per visit, excluding VAT. The exact figure depends on the fault, parts, access and timing. If the engineer finds further work on the day, it is quoted for your approval before it is carried out.
What information helps before a repair visit?
Photos or a short video of the fault are the most useful thing you can send, along with the make and model from the data plate, a description of what happens when the equipment is operated and any error codes. For a site in Shirley, also tell us about access, parking and site rules. With that, we can price the visit and bring the likely parts.
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
What is included in the service price?
The service price covers checking, adjusting and lubricating each item, testing its safety devices and a written report. Parts and repair work are not included; they are quoted separately so you can decide what to approve. Minor adjustments made during the visit are part of the service.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
Loading bay servicing near Shirley
We also cover towns near Shirley, including Solihull (2 miles), Birmingham (6 miles) and Washwood Heath (6 miles). Each has its own page with the same services and process.
Other loading bay services in Shirley
Full guide to loading bay servicing · Everything we do in Shirley
Request a quote for your loading bay in Shirley, attaching photos of the dock, the equipment and any damage.