Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Why do sites in South Yorkshire choose this?
When you take on a unit in South Yorkshire with no maintenance history, a baseline service report gives you a clear starting point for future planning. Servicing for dock equipment in South Yorkshire is priced per item per visit and agreed in writing before the first engineer attends site.
Mixed-age dock equipment at older sites in South Yorkshire benefits from a first service that records the condition of every item and prioritises any repairs.
For loading bay servicing in South Yorkshire, the visit is chargeable and priced up front. You will know the cost in writing before an engineer is booked. Photos of the problem, the make and model if known, and a description of what happens when the equipment is operated all help us prepare. If further work is needed, we quote it separately before doing it, and a written report closes every visit.
What does a loading bay service visit include?
A loading bay service visit includes checking, adjusting and lubricating each item, testing its safety devices and recording its condition. Typical checks by equipment type:
- Doors: springs, cables, balance, rollers, hinges, tracks, safety edges, photocells, fall-back devices, controls and manual operation.
- Levellers: hydraulic leaks and oil level, hoses, cylinders, lip and hinges, deck condition, toe guards, controls and the maintenance strut.
- Shelters and seals: curtains, frames, pads, covers, airbags and blowers.
- Restraints, lights and interlocks: engagement, sensors and the full interlock sequence.
- Bumpers and wheel guides: wear and fixings.
- Lift tables: toe guards, bellows, hydraulics, controls and gates.
Minor adjustments and lubrication are part of the service. Anything needing parts or more time is recorded and quoted as a repair, so you stay in control of spend.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
Towns we cover in South Yorkshire
Choose a town below to see how we handle loading bay servicing in that part of South Yorkshire.
- Sheffield
- Rotherham
- Doncaster
- Barnsley
- Bentley
- Chapeltown
- Darton
- Dinnington
- Adwick le Street
- Rawmarsh
- Maltby
- Thorne
- Wath-upon-Dearne
- Conisbrough
- Hoyland
- Wombwell
- Mexborough
The visit price is agreed before anyone attends. All guide prices.
What do the rules in England mean for the work?
Lift tables and dock lifts in South Yorkshire may fall under LOLER, with thorough examination at least every 12 months, or every 6 months where people are lifted. It depends on the equipment and how it is used, and your insurer or competent person will confirm. Dock levellers are usually treated as work equipment under PUWER. We check what applies before any work starts.
Questions
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Can you repair all makes of loading bay equipment?
We work on common makes and types of doors, dock levellers, shelters, seals and restraints. Parts availability varies, particularly for older or discontinued equipment, so it helps to send the make, model and photos of any data plates from your site in South Yorkshire. If original parts are not available, we tell you and price the alternatives, including replacement where that makes more sense.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
What is included in the service price?
The service price covers checking, adjusting and lubricating each item, testing its safety devices and a written report. Parts and repair work are not included; they are quoted separately so you can decide what to approve. Minor adjustments made during the visit are part of the service.
Other services in South Yorkshire
Full guide to loading bay servicing · All loading bay services in South Yorkshire