- Location
- Kendal, Cumbria
- Main postcode district
- LA9
- Nearby (straight line)
- Morecambe (18 miles), Lancaster (19 miles) and Heysham (20 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Kendal?
Ahead of an insurer inspection, sites near Kendal can line up a service visit so routine defects are dealt with before the inspector attends. Lift tables at warehouses in Kendal need a LOLER thorough examination regime alongside servicing, and the two can be scheduled to suit the operation.
Food, chilled and pharmaceutical operations around Kendal often prefer servicing outside loading peaks, which can be arranged with the price agreed beforehand.
Planned servicing and reactive repairs in Kendal are both chargeable. We agree the price of each visit in writing beforehand, and we never extend the scope without asking. Photos taken by your team help us plan the work and the parts. The engineer records the condition of doors, levellers, shelters and safety equipment as they go, and you receive that as a written report after the visit.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
How often should a loading bay be serviced?
Busy loading docks are commonly serviced twice a year, while lightly used bays may only need one visit a year. The right frequency depends on how hard the equipment works and what your risk assessment, the manufacturer's instructions and your insurer expect.
- Twice a year: common for distribution and logistics docks handling trailers through the day.
- Once a year: may suit occasional-use bays, such as a single goods-in door at a manufacturing site.
- More often: worth considering for docks running several shifts, very high door cycle counts, or harsh conditions such as frozen stores.
Insurer inspections and LOLER thorough examinations run on their own schedules. Many sites time a service shortly before each inspection so routine defects are dealt with first.
Our guide to loading bay maintenance sets out what a service covers and how to plan the frequency.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
What we look at around the bay
- Vehicle restraint engagement and its signal sequence
- Door panels, side seals and bottom rubbers
- Anti-fall device on upward-opening doors
- Control panels, push buttons and emergency stops
- Pit frame welds, platform cracks and structural damage
- Leveller toe guards and side skirting, where fitted
Options to discuss
Twice-yearly service
Two visits a year, common for busy docks, so wear on springs, hydraulics and shelter curtains is caught before it causes a breakdown at a busy time.
Lift table coordination
Servicing of scissor lift tables timed alongside the LOLER thorough examination regime set by your insurer or competent person, so defects are cleared before examination.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Kendal. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.
Questions about loading bay servicing in Kendal
How often should equipment at our Kendal site be serviced?
It depends on how hard the equipment works and on the manufacturer's recommendations. A multi-shift dock with frequent trailer movements needs more attention than a door that opens a few times a day. We suggest a schedule after looking at the equipment and how it is used, and we can line visits up with your insurance inspections where that helps.
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Kendal site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
How often should dock levellers be serviced?
Dock levellers on busy docks are commonly serviced twice a year, while lightly used levellers may only need an annual service. The right interval depends on usage, the manufacturer's instructions and your risk assessment. Insurer inspections and any LOLER examinations run on their own schedules.
Can servicing be carried out outside operating hours?
Yes, servicing can be arranged for evenings or weekends where daytime access is difficult. Out-of-hours visits cost more, and that price is agreed in writing before the visit. Many sites prefer quieter periods so bays can be released without affecting trailer arrivals.
Loading bay servicing near Kendal
If your site is not in Kendal itself, it may be near one of these: Morecambe (18 miles), Lancaster (19 miles) and Heysham (20 miles). Pick the closest.
Other loading bay services in Kendal
Full guide to loading bay servicing · Everything we do in Kendal
Use the quote tool to tell us about the doors, levellers or shelters at your Kendal site, and we will be in touch to arrange the next step.