- Location
- Chester-le-Street, County Durham
- Main postcode district
- DH3
- Nearby (straight line)
- Washington (4 miles), Houghton-le-Spring (5 miles) and Stanley (5 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
Is this right for your site in Chester-le-Street?
Food, chilled and pharmaceutical operations around Chester-le-Street often prefer servicing outside loading peaks, which can be arranged with the price agreed beforehand. Ahead of an insurer inspection, sites near Chester-le-Street can line up a service visit so routine defects are dealt with before the inspector attends.
Servicing for dock equipment in Chester-le-Street is priced per item per visit and agreed in writing before the first engineer attends site.
For loading bay servicing at sites in Chester-le-Street, you will always know the cost before anyone sets off. The visit is chargeable and its price is agreed in writing. Clear photos of the problem help the engineer arrive prepared. Where the visit reveals more work, we stop, explain and quote before going further, and a written report follows every attendance so you have a record of the condition of each item.
What inspections does the law require for loading bay equipment?
Loading bay equipment is work equipment under the Provision and Use of Work Equipment Regulations 1998 (PUWER), so it must be maintained in a safe condition and inspected where deterioration could lead to danger. In Northern Ireland the equivalent is PUWER (Northern Ireland) 1999.
- Insurer inspections: engineering insurers commonly inspect dock levellers under PUWER at 12-month intervals. This is separate from servicing.
- Lift tables: scissor lift tables fall under LOLER 1998, or LOLER (Northern Ireland) 1999, with thorough examination at least every 12 months, every 6 months if they lift people, or to a written examination scheme.
- Levellers and LOLER: most levellers are treated under PUWER, but one designed or used to lift people may fall under LOLER. This depends on the equipment and how it is used; your insurer or competent person will confirm.
- Doors: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, and the Northern Ireland 1993 equivalent, require fall-back and anti-trap protection, so these devices are tested at every service.
Our guide to dock leveller inspections under PUWER and LOLER explains what applies.
How much does loading bay servicing cost?
Loading bay servicing typically costs £85 to £180 per item per visit, excluding VAT, where an item is one door, leveller, shelter, restraint or lift table. Simple items such as a dock seal sit towards the lower end; high-speed doors and lift tables sit towards the top.
How the price is agreed:
- You send a list of equipment, with photos or asset labels if you have them.
- We agree the price per item and the visit schedule in writing before the first visit.
- Repairs found during a service are quoted separately and only done once you approve them.
What moves the price:
- Equipment type: powered doors, levellers and lift tables take longer than seals and lights.
- Number of items: larger sites spread travel and set-up across more items.
- Frequency: the number of visits a year.
- Timing: out-of-hours visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Checks made while we are on site
- Track alignment, rollers and wall fixings
- Traffic light function and interlock operation
- Vehicle restraint engagement and its signal sequence
- Safety edges, photocells and light curtains
- Previous service and inspection records, where available
- Door springs, cables and drums for wear or damage
Options to discuss
High-use programme
More frequent visits for docks running several shifts or very high trailer numbers, with the interval agreed after reviewing the equipment and how it is used.
Annual service
One planned visit a year, suited to lightly used bays, covering checks, adjustment, lubrication, safety device testing and a written condition report for each item.
Which rules apply in England?
Workplace safety in England is regulated by HSE. For a loading bay in Chester-le-Street, that means doors meeting regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992, equipment maintained under PUWER and suitable safeguards against vehicles driving away too early. We check what applies before any work starts and design the bay accordingly.
Questions about loading bay servicing in Chester-le-Street
Do you cover County Durham for loading bay servicing?
Yes. We take on loading bay servicing for sites in Chester-le-Street and throughout County Durham. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Chester-le-Street site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
Do you service equipment you did not install?
Yes. We service all the common types of loading bay door, leveller, shelter, seal, restraint and lift table, whoever installed them. The first visit records the condition of each item, which gives you a baseline for future planning. Older or obsolete items are flagged in the report so you can budget for them.
Are service visits chargeable?
Yes. Service visits are charged per item per visit, at a price agreed in writing before the first visit. Repairs found during a service are not included in that price; they are quoted separately and only carried out once you have approved them.
Loading bay servicing near Chester-le-Street
Distances are measured from Chester-le-Street. Nearby towns we cover include Washington (4 miles), Houghton-le-Spring (5 miles) and Stanley (5 miles), and other towns in the area are covered too.
Other loading bay services in Chester-le-Street
Full guide to loading bay servicing · Everything we do in Chester-le-Street
Send a few photos of the dock and a short description of the problem, and we will come back to you about your Chester-le-Street site.