Loading bay servicing covers planned preventive maintenance of dock equipment at agreed intervals. An engineer checks, adjusts and lubricates doors, levellers, shelters, seals, restraints, traffic lights and lift tables, tests safety devices and records defects in a written report. Servicing supports, but is separate from, insurer inspections and the LOLER thorough examinations that some equipment needs.
How does this suit sites in Cornwall?
Property managers looking after several units around Cornwall can use one servicing schedule and reporting format across every building they manage. Mixed-age dock equipment at older sites in Cornwall benefits from a first service that records the condition of every item and prioritises any repairs.
Servicing for dock equipment in Cornwall is priced per item per visit and agreed in writing before the first engineer attends site.
Our repair process in Cornwall has four parts. You describe the problem and send photos. We price the visit and confirm it in writing. The engineer attends, carries out the agreed work and quotes anything additional before doing it. You then receive a written report on the condition of the equipment and the work completed, which is useful for insurers, inspectors and your own planning.
What happens to defects found during a service?
Defects found during a service are recorded in the written report, graded by priority and quoted as repairs before any work is done. You decide what is repaired and when.
- Unsafe: the item should not be used until repaired. The engineer tells you on the day and the item is left out of use.
- Repair soon: wear or damage that will get worse, such as a weeping hose or a fraying cable.
- Monitor: early wear to check again at the next visit.
Each repair is priced in writing, and parts can be ordered once you approve so the work can often be done on a planned return visit. Keeping service reports alongside insurer reports gives a clear maintenance record for audits, insurers and landlords.
Over time the reports also show which items keep failing, which helps when deciding whether to keep repairing equipment or budget for replacement.
How much does loading bay servicing cost?
Loading bay servicing typically costs £85 to £180 per item per visit, excluding VAT, where an item is one door, leveller, shelter, restraint or lift table. Simple items such as a dock seal sit towards the lower end; high-speed doors and lift tables sit towards the top.
How the price is agreed:
- You send a list of equipment, with photos or asset labels if you have them.
- We agree the price per item and the visit schedule in writing before the first visit.
- Repairs found during a service are quoted separately and only done once you approve them.
What moves the price:
- Equipment type: powered doors, levellers and lift tables take longer than seals and lights.
- Number of items: larger sites spread travel and set-up across more items.
- Frequency: the number of visits a year.
- Timing: out-of-hours visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
Towns we cover in Cornwall
We take enquiries about loading bay servicing from across Cornwall. These are the towns with their own pages:
The visit price is agreed before anyone attends. All guide prices.
Planning, building control and safety law in England
Sites in Cornwall fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies before any work starts and build any approvals into the plan.
Questions
Can you take over our existing loading bay maintenance arrangement?
Yes. Send us a list of the equipment at your Cornwall site, with makes, models and approximate ages if known, plus recent service or inspection reports. We will propose a planned maintenance schedule and price it per item per visit. The first visit records the condition of everything, so you have a clear starting point for future servicing.
What is the difference between servicing and a statutory inspection?
Servicing keeps equipment working: cleaning, adjusting, lubricating and replacing worn parts. A statutory inspection or thorough examination is a separate check by a competent person, often arranged through your engineering insurer. Dock levellers are commonly inspected under PUWER at 12-month intervals, and lift tables may need LOLER thorough examination, depending on the equipment and how it is used. Your insurer or competent person will confirm what applies.
Is loading bay servicing the same as an insurer inspection?
No. Servicing is planned maintenance that keeps equipment working and safe, while an insurer inspection is an independent check, commonly every 12 months for levellers under PUWER. Many sites schedule a service shortly before each inspection, so routine defects are dealt with before the inspector attends.
Can servicing be carried out outside operating hours?
Yes, servicing can be arranged for evenings or weekends where daytime access is difficult. Out-of-hours visits cost more, and that price is agreed in writing before the visit. Many sites prefer quieter periods so bays can be released without affecting trailer arrivals.
Other services in Cornwall
Full guide to loading bay servicing · All loading bay services in Cornwall