- Location
- Trowbridge, Wiltshire
- Main postcode district
- BA14
- Nearby (straight line)
- Westbury (4 miles), Melksham (5 miles) and Bath (8 miles)
- Visit pricing
- Agreed in writing before we attend
Loading bay door repair covers diagnosing and fixing faults on industrial dock doors, including sectional overhead doors, roller shutters and high-speed fabric doors. Typical work includes replacing broken springs and cables, damaged panels, rollers and hinges, repairing motors and control panels, and restoring safety devices such as safety edges and photocells so the door works safely and closes securely again.
Is this right for your site in Trowbridge?
Where forklifts work close to the door opening, warehouses in Trowbridge may see impact damage to panels and tracks, which can usually be repaired section by section. If a dock door at a site in Trowbridge will not close, tell us about any security concerns so the visit and making the building secure can be planned together.
Repair requests from Trowbridge are handled in the same way as anywhere in the UK, with the price agreed before anyone attends and a written report afterwards.
Planned servicing and reactive repairs in Trowbridge are both chargeable. We agree the price of each visit in writing beforehand, and we never extend the scope without asking. Photos taken by your team help us plan the work and the parts. The engineer records the condition of doors, levellers, shelters and safety equipment as they go, and you receive that as a written report after the visit.
How much does a loading bay door repair cost?
A loading bay door repair typically costs £180 to £1,400 per repair, excluding VAT. A safety edge or photocell fault sits towards the lower end; a pair of springs, several panels or a new motor sits towards the top.
How the price is agreed:
- You describe the fault and send photos if you can.
- We agree the visit price in writing before anyone attends.
- If the engineer finds more work is needed, it is quoted and approved by you before it is done.
What moves the price:
- Parts: springs, cables, panels, motors and control boards vary widely, and matched panels may need ordering.
- Door size and type: larger, heavier doors need bigger springs and more labour.
- Access: high doors may need a powered access platform.
- Out-of-hours working: evening or weekend visits cost more.
- Location: remote and island sites carry travel costs, shown in advance.
VAT is added at the standard rate.
Why has my loading bay door stopped working?
Most loading bay door failures come down to a handful of causes: a broken spring, a damaged cable, a safety device fault, worn running gear or a motor and control problem. The symptom usually points to the cause.
- Door suddenly heavy, or motor straining: often a broken torsion spring.
- Door hanging lower on one side: a frayed or snapped lift cable, or a cable slipping on its drum.
- Door stops and reverses, or will not close: a dirty, misaligned or damaged photocell or safety edge.
- Grinding, juddering or noisy running: worn rollers or hinges, or a bent track after an impact.
- Motor hums but nothing moves, or no response: motor, gearbox, control board, limit settings or supply.
- High-speed door curtain out of its guides: a breakaway curtain that needs resetting, or a torn curtain.
If a door has a broken spring or cable, stop using it and keep people clear. Do not try to adjust springs yourself: they hold a great deal of stored energy.
The visit price is agreed before anyone attends. Parts and any extra work are quoted before they are fitted.
Bay checks on a repair or service visit
- Safety edges, photocells and light curtains
- Inflatable shelter fans, airbags and control function
- Dock bumpers for missing rubber or loose fixings
- Anti-fall device on upward-opening doors
- Track alignment, rollers and wall fixings
- Wiring, isolators and motor performance under load
Options to discuss
High-speed door curtain repairs
Resetting breakaway curtains, replacing torn fabric and repairing guides and drives on fast-acting doors used at docks and internal openings.
Panel and section replacement
Replacing impact-damaged sectional door panels or roller shutter slats, matched as closely as possible to the existing door, with tracks and hinges checked.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Trowbridge. Planning and Building Regulations questions are never assumed either way: we check what applies before any work starts, so you know before work is booked.
Questions about loading bay door repairs in Trowbridge
Can repairs be carried out outside our working hours?
Yes, by arrangement. Evening, night or weekend visits can be booked so that repairs and servicing at your Trowbridge site cause less disruption to loading. Out-of-hours attendance usually affects the price, so we include it when we agree the visit charge in writing. Tell us your shift pattern and the times when the dock is quietest.
What happens if the engineer finds the equipment unsafe?
If equipment is found to be unsafe, the engineer will tell you straight away and recommend that it is isolated and taken out of use until it is repaired. That is recorded in the written report. We then quote the repair so you can decide how to proceed. Keeping an unsafe door or leveller in service puts people at risk, so we will always raise it.
Do you cover Wiltshire for loading bay door repairs?
Yes. We take on loading bay door repairs for sites in Trowbridge and throughout Wiltshire. Each visit is arranged in advance, with the price agreed in writing before anyone attends. Specialist service engineers working under our management carry out the work, and we remain your point of contact from the first call to the written report.
Is a loading bay door repair visit chargeable?
Yes, every repair visit is chargeable, and the price is agreed with you in writing before anyone attends. If the engineer finds that more work or extra parts are needed once on site, that work is quoted and only carried out once you have approved it.
Is it safe to use a door with a broken spring?
No. A door with a broken spring or cable should be taken out of use and the area kept clear, because the door may be heavy, unbalanced or at risk of dropping. Springs store a great deal of energy, so do not try to adjust or remove them yourself.
Loading bay door repairs near Trowbridge
Other towns within reach of Trowbridge on our coverage list include Westbury (4 miles), Melksham (5 miles) and Bath (8 miles), all covered on the same terms.
Other loading bay services in Trowbridge
Full guide to loading bay door repairs · Everything we do in Trowbridge
Whether it is a new bay or a fault on an existing one, call us or request a quote for your site in Trowbridge.