A loading bay door automation package is an electric operator, control panel and set of safety devices fitted to an existing manual sectional door or roller shutter so it opens and closes at the press of a button. Once motorised, the door is a power-operated door, so it needs protection against trapping, such as a safety edge and photocells, and a way to be opened by hand if the power fails.
Is this right for your site in Wiltshire?
Upgrading manual docks to electric operation is a practical first step for sites in Wiltshire that later plan to add interlocks and traffic lights. Teams working on cold or wet docks in Wiltshire tend to leave doors open if they are hard to operate, so motorising them can help keep heat in.
Landlords upgrading manual doors across a multi-let estate in Wiltshire can standardise operators and controls so every tenant gets the same reliable setup.
Your loading bay stays our responsibility from the survey to the handover. In Wiltshire, the survey and written quote are free, and the quoted price is fixed for the agreed scope. Installation is carried out by specialist engineers working under our management, at times planned with you to protect your loading schedule. Out-of-hours work is available by arrangement. We finish by testing the equipment and handing over its documentation.
Which type of door operator is right for my door?
The right operator depends on the door type, its weight and how many times a day it runs. Matching the operator's duty cycle to real use is what stops motors overheating and failing early.
- Shaft-mounted operator: fits directly on the spring shaft of a sectional door. Compact, strong and suited to heavy, busy dock doors.
- Trolley operator: runs along a rail on the ceiling and pulls the door. Suits lighter sectional doors on quieter bays.
- Tubular motor: sits inside the barrel of a roller shutter, keeping the installation tidy on small and medium shutters.
- External or side-mounted motor: drives a shutter barrel by chain, for larger and heavier shutters.
Every option should include a manual override, either a hand chain or a release, so the door can be used during a power cut. On bays that cycle many times an hour we specify an industrial operator rated for that duty rather than a light-use unit.
How much does it cost to motorise a loading bay door?
Automating an existing loading bay door typically costs £1,100 to £2,400 per door, excluding VAT, supply and fit. That covers the operator, control panel, safety devices, wiring at the door and commissioning.
What moves the price:
- Door type and weight: heavy shutters and large sectional doors need more powerful operators.
- Operator type: shaft-mounted, trolley, tubular or external chain-drive.
- Control mode: hold-to-run controls need fewer safety devices than impulse or automatic operation.
- Safety devices: safety edge, photocells and, for automatic closing, additional sensing.
- Extras: remote controls, pull cords, induction loops and interlocks with levellers or traffic lights.
- Power: whether a suitable isolated supply already exists near the door.
If the door needs work before it can be motorised, such as new springs or rollers, we price that separately so you can see each cost. The written quote after a free site survey is the fixed price.
Towns we cover in Wiltshire
We cover loading bay door automation throughout Wiltshire, and the towns below each have their own page. If yours is not listed, get in touch anyway.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
Which rules apply in England?
Sites in Wiltshire fall under the rules for England. Structural changes such as forming a new opening or a dock leveller pit may need Building Regulations approval, and external structures such as loading houses, canopies or new dock approaches can need planning permission from the local planning authority. We check what applies at survey and build any approvals into the plan.
Questions
Do you remove and dispose of the old equipment?
Yes, where it is part of the scope. When we replace doors, levellers, shelters or seals at a site in Wiltshire, removal and disposal of the old equipment can be included and is itemised in the quote, so it is clear what is covered. If anything should be kept, such as a frame or motor that is still serviceable, we agree that at survey.
How do you price loading bay door automation for a site in Wiltshire?
Guide budgets for supply and fit are £1,100 to £2,400 per door, excluding VAT. The figure moves with size, insulation, the operator, electrics, access, any pit or groundworks and out-of-hours working. Where levellers are involved, the guide assumes an existing, sound pit. After the free survey you receive a fixed written quote, and that is the price for the agreed scope.
Do we need a three-phase supply?
Not always. Many operators for small and medium doors run on a single-phase supply, while larger industrial operators for heavy dock doors often need three-phase power. We confirm the supply your door needs at survey and can include any electrical work in the written quote.
Will we still be able to open the door in a power cut?
Yes, every automated door should have a manual override, typically a hand chain or a release that lets the door be lifted by hand. We show your team how to use it at handover, and it should be checked at each service visit so it works when needed.
Other services in Wiltshire
Full guide to loading bay door automation · All loading bay services in Wiltshire