- Location
- Chorley, Lancashire
- Main postcode district
- PR7
- Nearby (straight line)
- Leyland (4 miles), Darwen (7 miles) and Wigan (7 miles)
- Survey and quote
- Free, with a fixed written quote
A loading bay door automation package is an electric operator, control panel and set of safety devices fitted to an existing manual sectional door or roller shutter so it opens and closes at the press of a button. Once motorised, the door is a power-operated door, so it needs protection against trapping, such as a safety edge and photocells, and a way to be opened by hand if the power fails.
Where does this fit at a dock in Chorley?
Any automation project in Chorley begins with checking the door by hand, because a motor cannot make up for weak springs or worn rollers. Heavy shutters on trade and merchant sites in Chorley can be tiring to open by hand, which is where an external chain-drive motor earns its place.
Preparing a site in Chorley for a health and safety review is a good moment to motorise doors with proper trapping protection rather than leave staff on hand chains.
Keeping the dock running is usually the first concern, so we plan around it. After a free survey of your Chorley site and a written quote at a fixed price, we agree when each bay can be released and whether any work should happen out of hours. Specialist installation engineers working under our management then fit the equipment, and we test it and hand over the documentation before the bay goes back into use.
Which type of door operator is right for my door?
The right operator depends on the door type, its weight and how many times a day it runs. Matching the operator's duty cycle to real use is what stops motors overheating and failing early.
- Shaft-mounted operator: fits directly on the spring shaft of a sectional door. Compact, strong and suited to heavy, busy dock doors.
- Trolley operator: runs along a rail on the ceiling and pulls the door. Suits lighter sectional doors on quieter bays.
- Tubular motor: sits inside the barrel of a roller shutter, keeping the installation tidy on small and medium shutters.
- External or side-mounted motor: drives a shutter barrel by chain, for larger and heavier shutters.
Every option should include a manual override, either a hand chain or a release, so the door can be used during a power cut. On bays that cycle many times an hour we specify an industrial operator rated for that duty rather than a light-use unit.
What safety rules apply once a manual door is motorised?
Once a manual door is fitted with a motor it becomes a power-operated door, and the rules for powered doors apply in full. Automation is more than bolting on a motor.
- Workplace law: regulation 18 of the Workplace (Health, Safety and Welfare) Regulations 1992 in Great Britain, and the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993, require powered doors to have suitable and effective features to prevent trapping, and to be operable by hand where necessary unless they open automatically on power failure.
- Safety in use: BS EN 12453 sets out safety requirements and test methods for power-operated doors, including how closing forces are limited and measured.
- Product standard: BS EN 13241 covers the door as a product.
- Marking: in Great Britain a powered door may carry the UKCA or the CE mark; in Northern Ireland the CE mark, or CE with UKNI, applies.
Enforcement sits with HSE in Great Britain and HSENI in Northern Ireland. The results of the safety checks carried out at commissioning form part of the handover.
The same published guide range applies across England; access, out-of-hours working and site conditions are confirmed at the free survey.
Survey checklist for your dock
- Yard gradient and the slope of the approach to the dock
- Lighting inside trailers and at the dock face
- Whether planning, building control or a building warrant may be needed
- Bumper position and wear or damage on the dock face
- Asbestos register and any other site hazard information
- Wheel guide positions and yard markings for reversing vehicles
Options to discuss
Shaft-mounted operator
A compact industrial motor that fits directly onto the spring shaft of a sectional door, suited to heavy dock doors and bays that run many cycles a day.
Safety edge and photocells
A pressure-sensitive or optical edge on the bottom rail plus photocells across the opening, stopping and reversing the door if anything is in its path.
Which rules apply in England?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in Chorley. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions about loading bay door automation in Chorley
How long does installation take at a site in Chorley?
It depends on the equipment, the number of bays, the condition of the dock and whether any building or electrical work is needed. We agree a programme with you after the survey, setting out which bays are out of use and when. Larger jobs are usually phased so that part of the dock stays open, and out-of-hours working can be arranged.
Do you cover Chorley for loading bay door automation?
Yes. We take on loading bay door automation for businesses in Chorley and across Lancashire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
Is VAT included in your guide prices for loading bay door automation?
No. Our customers are businesses, so guide prices exclude VAT, which is added at the standard rate. The same guide range applies in Lancashire as everywhere else: for loading bay door automation, it is £1,100 to £2,400 per door, excluding VAT. It covers supply and fit for a typical installation. Your fixed written quote after the free survey shows the net price, the VAT and exactly what is included.
What is the difference between hold-to-run and impulse control?
With hold-to-run the operator must keep pressing the button for the door to move, so they watch it throughout. With impulse control a single press opens or closes the door fully, which saves time but requires full safety sensing such as a safety edge and photocells, because no one may be watching.
Do we need a three-phase supply?
Not always. Many operators for small and medium doors run on a single-phase supply, while larger industrial operators for heavy dock doors often need three-phase power. We confirm the supply your door needs at survey and can include any electrical work in the written quote.
Loading bay door automation near Chorley
If your site is not in Chorley itself, it may be near one of these: Leyland (4 miles), Darwen (7 miles) and Wigan (7 miles). Pick the closest.
Other loading bay services in Chorley
Full guide to loading bay door automation · Everything we do in Chorley
Start your enquiry for Chorley through the quote tool. A few photos and approximate sizes help us respond with something useful.