A loading bay door automation package is an electric operator, control panel and set of safety devices fitted to an existing manual sectional door or roller shutter so it opens and closes at the press of a button. Once motorised, the door is a power-operated door, so it needs protection against trapping, such as a safety edge and photocells, and a way to be opened by hand if the power fails.
What should sites in the East Riding of Yorkshire consider?
Preparing a site in the East Riding of Yorkshire for a health and safety review is a good moment to motorise doors with proper trapping protection rather than leave staff on hand chains. Heavy shutters on trade and merchant sites in the East Riding of Yorkshire can be tiring to open by hand, which is where an external chain-drive motor earns its place.
On older units in the East Riding of Yorkshire where the original doors are still sound, automation keeps the existing door working while removing the effort of hand chains.
Before anything is ordered, we visit your site in the East Riding of Yorkshire for a free survey and then send a written quote with a fixed price. From that point we manage the installation, coordinating delivery, access and any other trades. Fitting is done by specialist installation engineers engaged and managed by us, at times that suit your operation, including out of hours where agreed. You get a tested installation, a demonstration for your team and the manufacturer documentation.
Is my existing door suitable for automation?
An existing door is usually suitable for automation if it is structurally sound, correctly balanced and runs smoothly by hand. A motor should never be used to make up for a door that is heavy, stiff or damaged.
Signs a door can be automated:
- It lifts evenly by hand and stays put when released halfway.
- Springs, cables, rollers and tracks are in good order.
- Panels or laths are not badly dented or distorted.
Signs it may be better replaced:
- Springs are near the end of their life or have broken before.
- The door is single skin and the building is now heated.
- Parts are no longer available for the door model.
Where replacement makes more sense, we will say so and can quote for sectional loading bay doors supplied with an operator already fitted, so you can compare the two routes on cost.
How can door controls and interlocks make the dock safer?
Interlocks link the door to the rest of the dock so that each piece of equipment can only move when it is safe, which reduces both accidents and damage.
- Leveller interlock: the leveller cannot be raised until the door is fully open, protecting the door from the lip.
- Restraint or traffic light interlock: the door only opens once the trailer is restrained or the outside light shows red to the driver.
- Shelter interlock: with inflatable shelters, the door opens only once the cushions have inflated.
- Control mode: hold-to-run keeps the operator watching the door, while impulse controls save time but need full safety sensing.
Interlocks are far simpler to add while a door is being automated than as a separate job later. See dock traffic lights and interlocks for how a full dock sequence is set up.
Towns we cover in the East Riding of Yorkshire
Find your town in the list below for details of loading bay door automation across the East Riding of Yorkshire, or contact us if your location is not shown.
Budget range for supply and fit. The written quote after a free survey is the fixed price. All guide prices.
What do the rules in England mean for the work?
Powered doors and dock equipment installed in England may carry the UKCA or the CE mark, and doors are covered by the product standard BS EN 13241. We hand over the relevant documentation for each item fitted in the East Riding of Yorkshire. Planning and Building Regulations questions are never assumed either way: we check what applies at survey, so you know before work is booked.
Questions
Which building and safety rules apply to a site in the East Riding of Yorkshire?
It depends on which UK nation the site is in. England and Wales use Building Regulations approval, Scotland uses building warrants and Northern Ireland uses building control approval from the council. Workplace safety is regulated by HSE in Great Britain and HSENI in Northern Ireland, and energy rules differ between nations. For your site in the East Riding of Yorkshire, we check what applies at survey and design to it.
Do you cover the East Riding of Yorkshire for loading bay door automation?
Yes. We take on loading bay door automation for businesses in the East Riding of Yorkshire and across the East Riding of Yorkshire. We survey the site, provide a fixed written quote and manage the installation, with specialist installation engineers working under our management. Visits are arranged in advance at a time that suits your operation, and the same single contact stays with the job through to handover.
How long does it take to automate a dock door?
Most automations are completed within a working day per door, once any repairs to the door itself have been done. Larger shutters, or doors that need a new power supply, can take longer. We plan the work so that only the door being automated is out of use.
What is the difference between hold-to-run and impulse control?
With hold-to-run the operator must keep pressing the button for the door to move, so they watch it throughout. With impulse control a single press opens or closes the door fully, which saves time but requires full safety sensing such as a safety edge and photocells, because no one may be watching.
Other services in the East Riding of Yorkshire
Full guide to loading bay door automation · All loading bay services in the East Riding of Yorkshire